No products in the cart.
The QEP 1/4 in. Wet/Dry Diamond Hole Saw is designed for the easy, fast and accurate cutting of porcelain, ceramic and glass tiles. This hole saw features a special diamond grit edge for faster and smoother cuts, while using less water than conventional diamond drill bits. Simply dip the hole saw into water and drill the desired hole for professional quality and results.
- Ideal for cutting 1/4 in. holes in ceramic, porcelain and glass tiles with minimal water use
- Advanced metallurgical technology bonds diamond grit to chrome alloy steel base to produce a long-lasting cutting edge
- Extremely durable and built to last longer than conventional diamond drill bits and standard hole saws
- 12 times longer lasting than standard hole saws
- Simply dip in water, no need for a constant water delivery system, for quick and easy use
- Flexibility to be used in wet or dry cutting conditions is preferred by professional flooring installers
- Easy to clean by rinsing with hose or in clean water after each use
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 0.025 lbs |
|---|---|
| Dimensions | 0.75 × 2.75 × 7.00 in |
| Blade Length (in.) | 0.75 in |
| Blade Material | Diamond |
| Blade Width (in.) | 0.25 |
| Hand Tool Type | Blade |
| Individual/Set | Individual |
| Model | 10075 |
| Number of Pieces | 1 |
| Product Length (in.) | 0.25 in |
| Replacement Blade Type | Fixed Blade |
| Teeth Per Inch | 0 |
| Tools Product Type | Power Tool |
57 reviews for QEP 1/4 in. Pro Wet/Dry Diamond Hole Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Knives & Blades
Model# 44131
Knives & Blades
Stanley 1992 Heavy Duty Utility Blades with Dispenser (50-Pack)
Model# 11-921L
Knives & Blades
Model# 12-313
Knives & Blades
Model# 11-301L
$14.82
Knives & Blades
Milwaukee 25 mm Snap Off Knife with Metal Lock and Precision Cut Blade
Model# 48-22-1962
Knives & Blades
Model# 10-817
Knives & Blades
Model# DWHT11131
Knives & Blades
Model# RWK14D
Toney Sipes (verified owner) –
Drilled 2 holes then it was dull Each hole took about 10 minutes to drill. Not for porcelain tile
Oleta Price (verified owner) –
Cut through tile and attached grab bar. Hard to keep the bit wet as directed. Cut 5 holes and seemed to be used up.
Keyshawn Conroy (verified owner) –
worked very well but difficult to remove the core piece I have used another bit that has a slot down the side which made it a lot easier to remove the plug Drilled multiple holes well but was a pain to clean the center plug out
Letitia Nicolas (verified owner) –
works great
Deja Jenkins (verified owner) –
The drill was used to put holes in tile to assist in removal of tile without damaging remaining tile. The drill work well when following the directions.
Vern Shields (verified owner) –
Drill bit worked as described. Carefully following the instructions is crucial for getting optimal results.
Kory Schaden (verified owner) –
worked great
Gabriel Kuhic (verified owner) –
Much better that carbide bits. Only issue is, need to stop often to clean the hole in the middle. Also it is difficult to start precisely at center since bit is not pointed
Juana Daugherty (verified owner) –
Pretty good bit. I used with porcelain tile and the Qep wet container kit. The bit that came with the kit bent on the second hole. This bit was good for 4 or 5 holes then got dull. The bit gets easily jammed with stuff, so have something close by to get it out. Otherwise the bit can’t go into the tile very far when it’s inside is plugged.
Petra Schowalter (verified owner) –
Did the job with out chiping and quickly. Hanging the bowed shower rod was painlessly.
Rubye Willms (verified owner) –
Handles ceramic tile very well with occasional water applied for cooling. Approx 18 holes drilled and no noticeable loss of ability.
Reanna Satterfield (verified owner) –
Ground through porcelain tile fine. Required guide
Waylon Satterfield (verified owner) –
I had to drill through a very extremely difficult ceramic tile. This took some time but it’s the one that got the job done.
Lydia Leuschke (verified owner) –
Great drill bit
Damion Schiller (verified owner) –
Drilling trough ceramic can be tough, but the QEP 1/4 in. Pro Wet/Dry Diamond Hole Saw did the trick. I would suggest spraying the tip with water if possible while drilling. Also make sure that you clean the drill bit after drilling a hole. The center gets clogged with debris with each use.
Darion Lakin (verified owner) –
Very nice
Cesar Donnelly (verified owner) –
Product worked excellent on my newly installed porcelain shower tiles.
Gregg Beier (verified owner) –
Got the job done!
Lyda Botsford (verified owner) –
5 holes so far and seems to be still working.
Felicita Rohan (verified owner) –
Drilled multiple holes in glass and ceramic wall tile, dipping the tip in water periodically to keep it cool. It held up well, and I can still useit in the future if needed.