No products in the cart.
Stanley 2 in. Iron Bench Plane Blade Replacement
$18.04
This bench plane replacement iron is constructed from hardened tempered high carbon chrome steel which proveds a strong edge. The user has the ability to make the cutting edge razor sharp. Has a preset cutting edge of 25 degrees.
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
This bench plane replacement iron is constructed from hardened tempered high carbon chrome steel which proveds a strong edge. The user has the ability to make the cutting edge razor sharp. Has a preset cutting edge of 25 degrees.
- Hardened, tempered high-carbon chrome steel assures excellent edge retention
- Can be honed to a razor-sharp edge
- Ground to a flat surface for easy sharpening
- Comes with accurate ground edge of 25 degrees, finishing with an additional honed angle of 30 degrees is recommended
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 0.29 lbs |
|---|---|
| Dimensions | 10.20 × 2.55 × 0.10 in |
| Assembled Depth (in.) | 10.2 in |
| Assembled Height (in.) | 0.1 in |
| Assembled Width (in.) | 2.55 in |
| Blade Width (in.) | 2 |
| Can Be Sharpened | Yes |
| Hand Tool Type | Blade |
| Model | 12-313 |
| Tools Product Type | Hand Tool |
26 reviews for Stanley 2 in. Iron Bench Plane Blade Replacement
Only logged in customers who have purchased this product may leave a review.
Related products
Knives & Blades
Model# RWK14D
Knives & Blades
Model# 122CS6
Knives & Blades
Model# 10-989
Knives & Blades
Milwaukee Hook Utility Knife Blades with Dispenser (50-Piece)
Model# 48-22-1952
Knives & Blades
Model# STHT10274
Knives & Blades
Model# 10-788
Knives & Blades
Model# DWHT10045
Knives & Blades
Milwaukee 18 mm Snap-Off Knife with Metal Lock and Precision Cut Blade
Model# 48-22-1961
Brenda Welch (verified owner) –
The 2″ replacement irons (3) sharpened quickly and fit both my vintage (read Ebay) Union, Millers Falls and Stanley Smoother & Jack planes. Now in weekend use with no complaints.
Myrl Stamm (verified owner) –
Fits my Stanley no 5 type 11 and takes a sharp edge. Not used enough to determine edge durability.
Herminio O’Hara (verified owner) –
VERY WELL WORTH ITI ordered two blades, one for my No.4 and one for my No.5. The irons were delivered to the store about 3 weeks ahead of original delivery date, a big plus right there. They were both ground dead flat on the back and all that was needed was to go through the grits to remove the grinder marks and put on a nice mirror polish. The bevel side was ground square to the sides and I went through the grits again to remove the the grinder marks, polish and added a 30 degree secondary and honed the corners off slightly.
Savanna King (verified owner) –
I don’t know much about planes yet which is why I went with a cheaper one. But after puttin’ a little time into the blade on a sharpening stone to flatten the back and sharpen the bevel, it cuts pretty well. Could probably be better but I’m still learnin’ so it’s whatevsy. Overall pretty satisfied with this tool, though I’ll definitely upgrade to a better one at some point.
Emerson Kub (verified owner) –
Good replacement blade for #4 Stanley Planes. These are packaged marked on the steel by Stanley. Like all cheaper replacement blades, they do require a little flattening on the back and honing before they will produce repeatable shavings. I have several that I keep ready to go as spares.
Ara Rowe (verified owner) –
work well
Carlee Douglas (verified owner) –
This is a direct replacement plane iron usually #3 or #4 Stanley plane you should always put a very fine edge on them before using. If you don’t use your plane every day its perfect for part time users. Had this one for months and its holding up just fine
Quinn Von (verified owner) –
it works good
Jerry O’Connell (verified owner) –
The plane iron was just what I expected. The steel looks fine, but I haven’t tested it with a lot of hard work. It seems about the same as some older Stanley plane irons that I already own. It was reasonably flat and it took a final bevel and microbevel just fine. No complaints here.
Rosalia Mohr (verified owner) –
This was exactly what I was looking for. Great price and fast shipping. Thanks
Alexis Pfeffer (verified owner) –
It’s an exact replacement for the original iron—fits right in a #4 or #5, and the metal seems to behave the same. All I could ask.
Lavon Kris (verified owner) –
On time and got help from employee
Isobel Will (verified owner) –
Takes a very nice edge
Logan Beier (verified owner) –
Came in a timely manner, needed only minor sharpening, works well.
Shanon Kling (verified owner) –
It is just like original, no thicker. However, when properly sharpened works very well.
Curtis Goldner (verified owner) –
excellent packaging of a very use full tool, which fits perfectly to a very old plane.
Crystel Gerlach (verified owner) –
This blade is made of good quality steel and is exactly what I expected from Stanley as a replacement for my plane
Estel Kohler (verified owner) –
easy to install.
Berenice Friesen (verified owner) –
The right blade and OEM quality.
Anita Jaskolski (verified owner) –
Fits my Stanley no 5 type 11 and takes a sharp edge. Not used enough to determine edge durability.