No products in the cart.
Milescraft PocketJig200XCJ Ultimate Pocket Hole Bundle with 2 Jigs and 2 in. FaceClamp
$39.76
Proffer a fantastic and durable addition to your workstation with the selection of this extra ordinary Milescraft 720 PocketJig Ultimate Pocket Hole Bundle with and FaceClamp.
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
The ultimate pocket hole kit includes the Milescraft PocketJig100, single barrel jig, the Milescraft PocketJig200 double barrel jig, plus a 2 in. FaceClamp and accessories. Everything you need for your pocket hole projects. PocketJig200 pocket hole jig allows you to connect your workpieces in a quick and timely manner. Whether you want to build storage projects, cabinets, shelves or bookcases, this kit does it all. Allowing you to create corner joints, T-Joints, Framing Joints, Miter Joints and do repairs. With built-in settings for board thicknesses, there is no need to manually measure. Just set this pocket jig to your desired setting, set the depth of your bit and start drilling. PocketJig100 has a small, compact design that allows you to do applications where a small jig is required. Built-in board thickness locations for easy measurement and set-up of your workpieces, virtually eliminating the need for manual measurements.
- With built-in imperial and metric scales these jigs allow you to easily measure the thickness of your work piece
- 4 common board thickness settings built-into the pocket jig: 1/2 in., 3/4 in., 1 in. and 1-1/2 in. (12 mm, 19 mm, 27 mm, 38 mm)
- Hardened steel drill bushings for precise and accurate pocket holes every time
- Tight tolerances between the bushing and the drill bit, reduce tear-out and create a clean pocket hole on the first try
- Recessed clamp pocket with magnet helps to keep the clamp in position as you move to different locations
- Convenient built-in depth setting to easily set your bit for the correct drilling depth
- 3/8 in. step drill bit made from high-speed steel with a 1/4 in. hex shaft that is designed to reduce clogging and provides smooth and precise pocket holes
- 3/8 in. split design stop collar with flat, prevents slipping of the set screw when tightened and the flat prevents the bit from rolling
- Rugged storage case with designated places for all components
- Includes pocket hole screws and plugs
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 2.95 lbs |
|---|---|
| Dimensions | 9.63 × 8.00 × 2.63 in |
| Individual/Set | Individual |
| Jig type | Drill |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Maximum stock size (in.) | 1.5 |
| Minimum stock size (in.) | .5 |
| Model | 7336 |
| Number of Pieces | 77 |
| Power Tool Accessory Type | Jig |
| Product Length (in.) | 9.63 in |
28 reviews for Milescraft PocketJig200XCJ Ultimate Pocket Hole Bundle with 2 Jigs and 2 in. FaceClamp
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# 122100R
Cutting Tools
Model# 2100-9
Cutting Tools
Model# M5RL
Cutting Tools
Model# 20-220
Cutting Tools
Model# 21010-6-SEN
Cutting Tools
Model# 63324
$110.74
Cutting Tools
Model# E5
Cutting Tools
Model# 701-S
Adalberto Littel (verified owner) –
Was very hesistant to purchase but after reading reviews online decided to to buy. Glad I did! Very easy to use. Instructions are clear.Like that I was able to use it straight out of the box.The Minescraft Pocket Jig Bundle is an excellent value. Does not feel cheap.
Ali Hartmann (verified owner) –
Great tool for the price and easy to use. Never questioned “why did I get this thing!!!!?”
Axel O’Keefe (verified owner) –
Works good and comes with a case to hold everything.
Kieran Lang (verified owner) –
It is a neat little package, jam packed with stuff with which to make pocket holes. I recommend one practice some on scrap wood to be sure the pocket holes are in the best position for the screw to exit where you want. You have to be careful not to blast the screw trough softwood. Once again perfect practice makes perfect. The only nit I have to pick is that I wish the screws had a square hole for the driver rather than the star shaped one. I notice that the Kreg screws and drivers use the square holes. Also I could use a larger clamp device than is included in kit. All in all the Milescraft kit is an lnexpensive way to get into pocket hole joinery. I also purchased a supliment package of lots of screws.
Haskell Howell (verified owner) –
great quality for an amazing prize…not going to mention the competition, but wow it does the same job, for a fraction of the price, you cannot go wrong with that. it’s a nice kit.
Judy Gusikowski (verified owner) –
This jig works great, would buy again.
Bethany Ullrich (verified owner) –
This pocket jig was Better then I expected, the instructions are easy to understand and the tool is self explanatory.
Hector Hegmann (verified owner) –
This was my first time using something like this. After reading the instructions and practicing on some scrap wood, the whole process from start to finish seemed so simple. I would definitely recommend this product to someone who, like me, is just going to use it from time to time and doesn’t want to spend a whole lot more money on the more popular brand name.
Shanelle Koelpin (verified owner) –
Real good quality. Easy to operate
Amaya Cremin (verified owner) –
This pocket jig worked well. Nice to have it as a “set” where everything (all the tools) you need are together. I didn’t need to purchase a clap separate from the pocket jig, bits and so on. The quality of the pocket jig and clamp are good; and having a case is great to be able to store neatly in your shop.
Waylon Schinner (verified owner) –
Worked great right out of the box at a good price
Sandra Roob (verified owner) –
Great value and great buy! I would call it the Kreg Killer. More value for your money.
Lenore Keebler (verified owner) –
This is a well put together kit and includes everything you need to make pocket holes, especially for the price.
Edwina Stamm (verified owner) –
Easy to use and good quality
Sage Langosh (verified owner) –
Good quality. Nice case. Complete and easy to follow directions. I’m very happy with this tool kit.
Carole Mitchell (verified owner) –
I’ve only used it once, but it was simple and quick to use.
Ernestine Cole (verified owner) –
Kit was very easy to use and worked great! Built a custom “L” shaped desk for my sons bedroom. Made buliding and assembly incredibly easy.
Leanna Luettgen (verified owner) –
OK I’m new to pocket jigs, but this thing is awesome! Watched several online videos to see how to use it, and it works great. Should have purchased more screws because there were not enough to do the small job I got it for, but was an easy (but inconvenient) fix.
Griffin Abshire (verified owner) –
This item came with a lot of accessories. I only used it one time, but so far so good.
Destiney Corwin (verified owner) –
Kit has almost everything needed to easily make pocket holes joints (I bought a Milescraft 4004 right angle clamp to help make assembly easy and accurate) and is a great value $.