No products in the cart.
The Kreg 8.25 in. Mini Jig Pocket Hole Kit comes with 1 hole mini jig, step drill bit, depth collar and Allen wrench. This kit was designed without an alignment fence, allowing you to clamp it at virtually any angle or orientation to the edge of your workpiece. This kit is ideal for when the project is already assembled and needs an extra pocket hole or when you need to repair something, such as tighten a chair or table rail to the leg.
- Single-drill guide design
- Unlimited material thickness and width positioning
- Hardened steel drill guide with lifetime manufacturer warranty
- Glass-reinforced nylon jig body
- For small- and medium-sized workpieces
- Fenceless design for precise adjustments to angle and stock depth
- Note: product may vary by store
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | .35 lbs |
|---|---|
| Dimensions | 9.00 × 3.25 × 1.75 in |
| Individual/Set | Individual |
| Jig type | Drill |
| Material | Plastic |
| Maximum stock size (in.) | 0.185 |
| Minimum stock size (in.) | 0.1 |
| Model | MKJKIT |
| Number of Pieces | 4 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 3.25 in |
| Tools Product Type | Power Tool |
83 reviews for Kreg 8.25 in. Mini Jig Pocket Hole Kit
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# A13L
Cutting Tools
Model# M6RS
Cutting Tools
Model# 21010-6-SEN
Cutting Tools
Model# 20-220
Cutting Tools
Model# 701-S
Cutting Tools
Stanley 27.75 in. Adjustable Angle Clamping Miter Box with 22 in. Saw
Model# 20-800
Cutting Tools
Model# 20-029L
Cutting Tools
Model# E5
Weldon Wilderman (verified owner) –
Just the right tool for the job, couldn’t be more pleased on how it makes my projects go alot faster
Precious Johns (verified owner) –
Handy tool for putting pocket holes in a tight place. One suggestion for improvement…put some marks on the side of the jig to indicate clamping position for different thickness of material. That little piece of paper it’s printed on isn’t going to last too long.
Colby Mueller (verified owner) –
Quality product, simple to use.
Timmothy Gleichner (verified owner) –
Worked great for my bookshelf
Reynold Robel (verified owner) –
Worked just fine. Need a c clamp to hold it in place.RJ
Robert Von (verified owner) –
Works well. It just needs to be clamped tightly. I also thick you can go longer on the length from wood edge if going with the wood grain.
Destiny Grady (verified owner) –
Broke my go to Kreg Jig Drill Bit and customer service took care of it. Thank Kreg!
Luigi Skiles (verified owner) –
Highly recommended
Aiden Metz (verified owner) –
Keegan is a great product
Delaney Moen (verified owner) –
Good tool, works as expected.
Tia Ratke (verified owner) –
Purchased this for some amateur furniture construction and it has been fantastic. I looked through all the variations of this product, including the multi slot and fancy precise versions, but having used this, all that is really unnecessary. Just line up the front with a pencil mark or use spacers, its not complicated.
Naomie Feeney (verified owner) –
Very cool product. Makes an easy job of butt joining boards. Dinging one star for not including the stupid square bit needed for the Krieg specific screws in either this kit or the 50 pack of screws. But I found the Spax phillips screws in the screw aisle are basically the exact same sizes without the need for the dumb square bit.
Brandi Jast (verified owner) –
Works like a champ
Mason Langworth (verified owner) –
Economical version of the larger Kreg jig. Works very well, but the larger jig is far superior if drilling many holes.
Modesta Luettgen (verified owner) –
First time using pocket hole screws. Came out perfectly and quickly despite 3 year old grandchild sitting on my back!
Annetta Osinski (verified owner) –
Works as advertised
Pierre Hessel (verified owner) –
For a decent price this gives you the basic equipment to make good pocket holes. Instructions are simple to understand and implement. Even if you prefer freehanding pocket holes, I’d recommend this kind of drill bit. Just make sure you get the correct length screws and an extended bit.
Caesar Connelly (verified owner) –
Did the job and impressed first time users. Its the smart way to build with functionality and strength in mind.
Jedidiah Treutel (verified owner) –
This is a high quality, inexpensive and simple tool that allows you to make strong butt joints. I used it to make a frame to support a magnetic bulletin board.
Myra Kling (verified owner) –
I can represent any place I need small doesn’t take too much to adjust