No products in the cart.
Remember when you had a powerful nailer to finish the job? The WEN 16-Gauge Pneumatic Finish Nailer is the perfect companion for crown molding, cabinets, wood furniture, baseboards, trim work, hardwood flooring, paneling and more. The spacious magazine holds up to 100 16-gauge brads at a time, accepting nails anywhere from 3/4 of an inch to 2-1/2 inches in length. Simply attach your favorite air compressor up to the 1/4-inch 18 NPT air inlet and get to firing. The depth adjustment wheel allows users to control how deep the fired nails go while the spring-loaded nail indicator warns you when your nail supply is running low. The quick-release nose makes clearing jams a breeze in the off chance that one occurs. For maximum precision, install the single-fire trigger to prevent from misfiring two nails into the same spot, or to minimize work time, use the sequential trigger for reliable bump firing. Uses 3.8 CFM of air when operating at 90 PSI. And because its a WEN product, your framing nailer comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.
- Features both a contact and a multi-fire trigger for both single and sequential firing modes
- Accepts 16-Gauge brad nails ranging from 3/4 to 2-1/2 in.
- Depth adjustment wheel allows users to control the depth of the fired nails
- Magazine holds up to 100 nails at a time
- Includes a spacious carrying case, rubber-gripped handle, and lubricating oil
- Backed by a 2 year warranty
| Weight | 4.8 lbs |
|---|---|
| Dimensions | 15.80 × 13.70 × 5.00 in |
| Air Tool Type | Air Nailer |
| Compressor/Air Tool Features | Adjustable Exhaust Port, Fastener Depth Control |
| Condition | New |
| Cordless/ Corded | Corded |
| Included | Case, Oil |
| Loading type | Strip |
| Maximum Fastener Size | 3/4 in |
| Minimum Fastener Size | 2-1/2 in |
| Minimum Recommended Air Delivery SCFM @ 90PSI | 3.8 |
| Minimum Recommended Operating Pressure (psi) | 70 |
| Model | 61764 |
| Nail Gauge | 16 |
| Nailgun Angle | 0 |
| Power Type | Air |
| Reconditioned | No |
| Tools Product Type | Air Tool |
22 reviews for WEN Pneumatic 16-Gauge Straight Finish Nailer with Carrying Case
Only logged in customers who have purchased this product may leave a review.
Related products
Nail Guns
Model# FR350B
Nail Guns
Model# D51257K
Nail Guns
Porter-Cable 3-1/2 in. 30 Degree to 34 Degree Clipped-Head Framing Nailer
Model# FC350B
Nail Guns
Freeman Pneumatic Framing and Finishing Nailers and Stapler Combo Kit with Canvas Bag (4-Pieces)
Model# P4FRFNCB
Nail Guns
Model# HDX123
Nail Guns
Model# DPBR50
Nail Guns
Model# PIN138
Nail Guns
Model# FN250C
Robb Roberts (verified owner) –
It was the first time I used a nail gun. I read the manual,hooked everything up,and it works great! I highly recommend this item and it was shipped to me very quickly.
Morris Hane (verified owner) –
This thing is awesome, for the price I don’t think you could find a better nailer. Have used it several times since I got it for Christmas and it works flawless. I have had an 18 gauge nailer stapler combo for quite a while but needed something to shoot a little bigger nails. This is it.. comfortable and easy to use.
Melvin Carter (verified owner) –
Works great really good looking tool!
Laurine Green (verified owner) –
Great product and was reasonably priced. Easy to use and seems to be sturdy and well made.
Leilani Schowalter (verified owner) –
It drove 2 1/2” finish nail through pine with little effort. Have not tried it with hard wood
Rodger Pouros (verified owner) –
I needed an all purpose pneumatic finish nailer to use with my air compressor so I chose this finish nailer because it is solid and flexible and just what I wanted to use on several projects at my church that needed doing while our day school was off for the summer. the first project was to reinstall some very thick and hard pegboard Masonite on the back of several cabinets which had been removed years before, but now needed to be refastened. I loaded the nails and set what I thought would be enough to finish the depth correctly but it was a bit too deep so a quick adjustment with the depth wheel and it was perfect. The nail gun made very short time saving work of what could have been a long difficult job. I then switched to several rooms where the base board had to be replaced and again with a simple adjustment with the adjusting wheel and it was easy and went quickly. I was totally impressed with the ease of adjustment and the overall quality of the product and the work it does.
Woodrow Heller (verified owner) –
Did a short test run. Shot a few brads in some wood. Works fine. Won’t be used on a project for a couple more weeks.
Gardner Doyle (verified owner) –
Works great! Been building crates with it no problem. Pounds straight through 2×4 with ease. Haven’t tried any hard woods yet- but have faith in it.
Kyle Denesik (verified owner) –
Can only give it 4 stars as I have only practiced with it to get the nail depth to the proper setting for the job I will be working on soon,but like what I see so far.
Cruz Lubowitz (verified owner) –
It nails well, so far no issues. Good price.
Keyshawn Ziemann (verified owner) –
I can’t comment on its long term use, but for this DIY’er it is great. It’s easy to set up, easy to use and a great time saver. For the price, I think it’s a great deal
Kattie Crist (verified owner) –
The Wen pneumatic nailer worked great right out of the box and was very easy to use. I tried it out on my shop table and used 2 inch staples on various types of wood blocks including hard wood, plywood and soft wood. The depth adjusting wheel allow me to easily adjust how deep the nails went. I even had some rock hard maple and hickory scrapes and they were nailed together without any issues. I could change out nail sizes quickly and easily. I used the single fire trigger in my testing and did not have any jams. The nailer comes with a roomy storage and carrying case, It comes with a two year warranty which is excellent. The rubber grip handle provides for easy holding and it is well balanced. It is a little bulky but I seldom work in tight quarters so that should seldom be an issue. It is a great tool for the price and I certainly recommend it.
Jazlyn Rice (verified owner) –
So Easy to Use
Carlee Kutch (verified owner) –
Only used once for building a bookcase. So far works perfectly. Having gone through a couple of inexpensive nailers from a discount outlet, all Chinese products, i’m Hoping this one lasts a bit longer. Be sure to oil as directed and use proper nails.
Minerva Hamill (verified owner) –
Works great! Highly recommend
Seth Gusikowski (verified owner) –
Good quality and worked reliably.
Assunta Beahan (verified owner) –
Good quality and worked reliably.
Nicolas Kulas (verified owner) –
I should have bought one of these years ago. So handy. I have used it to make some shelves a ups parcel box and an entertainment center. Love that it will use multiple lengths of nails.
Aileen Sporer (verified owner) –
WEN has done a nice job with this nailer. Everything fits well in the molded case. They included eye protection, tool oil, Allen wrenches and a well written manual. They even made the effort to make it a little humorous if you take the time to read it. It is well balanced; has a nice range of nail depth adjustments; comes with a non-marking tip; includes a bump trigger (it arrives with the standard trigger installed); and has an adjustable exhaust port. It fired 2 1/2” nails into a pair of 2”x4”s without issue. I did need to contact customer support and am very pleased to report that they promptly responded to my email and resolved my issue immediately. That seems to be hit or miss lately so I wanted to mention it. It is reassuring to know that they are there if you need them.
Natalia Macejkovic (verified owner) –
I do big and small projects around the house, so I didn’t want to spend a lot of money on a finish nailer. This fit the ticket and gets the job done.