No products in the cart.
Remember when your bench had a vise on it? Keep your workpieces secure with the WEN 5-Inch Bench Vise. Our crosscut non-slip 5-inch jaws open up to a spacious 6 inches, keeping your workpieces perfectly still for sawing, drilling, polishing, grinding, or whatever else you need to get done. Made from heavy duty powder-coated 36,000 PSI cast iron, the WEN Bench Vise grips tightly onto your workpieces, providing over 2950 pounds of clamping force. The swiveling base pivots over 120 degrees to meet the needs of any project, with three 12 mm mounting holes to attach to the table of your choice. Onboard 3.4 by 3.5-inch anvil provides metalworkers an aid for forging tools. And because its a WEN product, your bench vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.
- 5-inch by 3/4-inch crosscut jaws open up to 6 inches wide
- Swiveling base pivots over 120 degrees
- Constructed from heavy duty 36,000 PSI cast iron
- Over 2950 pounds of clamping force tightly secure your workpiece in place
- Features an onboard 3.4 by 3.5-inch anvil
- Sturdy design weighs in at 23.7 lbs.
- Backed by a 2-year warranty
| Weight | 23.7 lbs |
|---|---|
| Dimensions | 13.39 × 6.30 × 7.09 in |
| Clamping Strength (lb.) | 2967 |
| Duty Rating | Heavy |
| Hand Tool Type | Vise |
| Individual/Set | Individual |
| Jaw Capacity | 6 |
| Jaw Width | 5 |
| Material | Cast Iron |
| Model | 455BV |
| Swivel base | Yes |
| Throat Depth | 0.75 in |
| Tools Product Type | Hand Tool |
| Vise Type | Bench |
67 reviews for WEN 5 in. Heavy-Duty Cast Iron Bench Vise with Swivel Base
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Model# TT21
Fastening Tools
Model# RK6120
Fastening Tools
Arrow T50 3/8 in. Leg x 3/8 in. Crown Galvanized Steel Staples (5,000-Pack)
Model# 506IP
Fastening Tools
Model# DWHTMR77C
Fastening Tools
Model# DWHTTA7065
Fastening Tools
Model# 66987
Fastening Tools
Model# 480
Fastening Tools
DEWALT 6 in. 100 lbs. Trigger Clamp with 2.43 in. Throat Depth
Model# DWHT83139
Larry Ratke (verified owner) –
Small vise but it works great. I use it mounted on a bench to sharpen a professional logging saw, does all I need it to….and you definitely can’t beat it for the price!
Foster Turner (verified owner) –
Simplify my wood work
Mellie White (verified owner) –
it is pretty small but that is all I needed.works great for odds and ends that i do. but if you are looking for something to use all time for a work shop , than this is too small
Thaddeus Kris (verified owner) –
So far this bench vice has performed as well as top quality ones I have owned, costing MUCH MORE. Smooth adjustments, holds tight and the anvil is strong and solid. For a 3 inch vice, and the unbelievable low cost, I cannot imagine a better deal anywhere.
Christop Abshire (verified owner) –
Is perfect for what I need, price was great! Rugged vise, shrunk to 3”.
Hester Marks (verified owner) –
Can’t beat it for the price.
Evelyn Lang (verified owner) –
size and quality is good for my need.
Conner Padberg (verified owner) –
Very good Vice. Very sturdy. Just what i was looking for at a great price.
Mauricio Abshire (verified owner) –
I beat down some rivets and I worried about breaking it, kind of flimsy not as heavy duty as I thought it would be.
Turner Rosenbaum (verified owner) –
Pretty sturdy for a little clamp,and compact I would Definitely recommend
Adele Mills (verified owner) –
Good inexpensive product.
Reagan Reichel (verified owner) –
Bought it sight unseen. It’s 3 inch size is perfect for the job I need it for. Quality of it great. Paint job matches the stand I built. Anyone looking for small bench vise, I highly recommend it.
Odessa Ondricka (verified owner) –
*TOO SMALL*HANDLE TURNED/SPINNED TOO HARD AND TIGHT
Shanny Schuster (verified owner) –
A great vise for my workbench. Opens wide enough for all of my applications thus far. I wish the vise rotated more, but I mounted it on a corner to make the most of what it offers. The mounting holes are listed as 12.7mm, or 1/2 inch; use a 12mm bolt as the 12.7 does not fit in the holes.
Maxie Jacobson (verified owner) –
Great quality for the price; much more stable than alternatives
Brock Eichmann (verified owner) –
Great vice for the price, came fast and is just what I needed.
Michael Hermiston (verified owner) –
Sturdy & good value
Lois Becker (verified owner) –
This is good for light home use seems well made I am satisfied. Just wondering why I had to order seems like it should be on the floor
Delpha Stehr (verified owner) –
Came in time.
Wilfredo Miller (verified owner) –
High quality for low price. Easy to install and operate.