No products in the cart.
WEN 4.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise
$53.75
Grab an extraordinary addition to modernize your workshop without any hesitation with the assistance of this WEN Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise.
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
Remember when you could make fine-tune adjustments with the simple turn of a wheel? The WEN 4.25-Inch Cross Vise provides stable support for your workpieces. Perfect for incremental drilling and other precision work. Attach it to your bench top, your drill press, your work table and more. Made from heavy duty powder-coated cast iron, the WEN Cross Vise grips tightly onto your workpieces, providing over 1900 pounds of clamping force. The 4.25 by 1.25 jaws open up to 4.125 inches wide. Make minor adjustments along either axis with the onboard hand wheels. Each hand wheel features machined 0.1 mm increments, each full turn representing 3 mm of travel. The vise moves a full 5.8 inches (148 mm) along the x-axis and 6 inches along the y-axis (150 mm), making it the perfect companion for woodworkers and metalworkers alike. The fixed jaw features a V-shaped groove to hold round objects either vertically or horizontally while the removable handles help users easily install the vise into tight spaces. With five 1/2-inch mounting brackets positioned around the outside edge of the vise’s base, the WEN Cross Vise is compatible with the majority of drill press tables on the market. And because it’s a WEN product, your cross vise comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.
- 4.25 by 1.25 in. jaws open up to 4.125 in. wide
- Constructed of industrial-strength powder-coated cast iron
- Hand wheels feature machine-marked 0.1 mm increments for maximum precision
- Jaws travel 5.8 in. left and right and 6 in. front and back
- Five 1/2-in. mounting brackets allow for compatibility with the majority of drill press tables on the market
| Weight | 19.1 lbs |
|---|---|
| Dimensions | 10.25 × 10.25 × 6.70 in |
| Clamping Strength (lb.) | 1984 |
| Duty Rating | Standard |
| Hand Tool Type | Vise |
| Individual/Set | Individual |
| Jaw Capacity | 4.125 in |
| Jaw Width | 4.25 |
| Material | Cast Iron |
| Model | 414CV |
| Swivel base | No |
| Throat Depth | 4.25 in |
| Tools Product Type | Hand Tool |
79 reviews for WEN 4.25 in. Compound Cross Slide Industrial Strength Benchtop and Drill Press Vise
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Model# DWHTMR77C
Fastening Tools
Model# 28608
Fastening Tools
Model# 905-AS
Fastening Tools
Model# 38-604
Fastening Tools
Model# DWHTTA7065
Fastening Tools
Model# HT50P
Fastening Tools
Model# 66987
Fastening Tools
Model# TRE550Z
Otilia Gutkowski (verified owner) –
Nice vise. READ THE INSTRUCTIONS before use. I initially, mistakenly, thought vise was TOO STIFF. Guessing initial stiff setup by factory helps with shipping. Fixed stiffness by slightly loosening set screws (part 6 and 23 on diagram). Reading instructions before screwing around would have helped me get a grip on how to use effectively.
Kaela Corwin (verified owner) –
Smooth movement throughout the travel on both axis.
Jude Marvin (verified owner) –
Have not used it yet. Looks great.
Kelvin Mueller (verified owner) –
I ordered this vise but it was allittle to big for my 8inch drill press
Kellie Rutherford (verified owner) –
Better and cheaper than hf
Melvin Pfeffer (verified owner) –
Great value for the $$$$$ worked perfectly
Rose Jacobs (verified owner) –
decent for the money…but the screws get stuck in parts and don’t turn smoothly and the holes to mount it could be better as they don’t align with many drill press tables so you need to clean and re-grease and de-bur it before use.
Alysson Parker (verified owner) –
This vise is Well made and represents a good value.
Macey Schuster (verified owner) –
Great tool!
Emma Waelchi (verified owner) –
Very happy with vise
Marlon Halvorson (verified owner) –
For 50 bucks it’s what you get. Plenty of slop in the travel and lots of attention needed in the ways. Better than nothing. And ok for the frequency that I”ll use it. But it is crude. About on par with Harbor Freight stuff.
Roosevelt Weber (verified owner) –
The unit did not line up with the plate on my drill press. I could not user 1/2 inch bolts to mount it. I did mount it with smaller #8 hardened bolts. It needed to be lubricated and the slides and tension adjusted. It now works fine.
Imogene Beier (verified owner) –
Good unit for the money
Floy Carroll (verified owner) –
Did not mount to my 8″ Wen drill press smoothly at all. Bolt holes do not mate up with drills work table slots, had to drill my own (lack of foresight from mfg). Also, the handle of the vise jaws lockdown adjustment and the windage for the acme screw were on opposing sides, causing interference with the drill stand pillar and unrealistic non ergonomic adjustment. Had to remedy that by removing the acme screw, drilling and tapping the other side of the vise, and remounting the assembly. Lots of extra work because of lazy engineering. End result after the modifications is decent though after lubing and fine tuning the gibs.
Keyon Jenkins (verified owner) –
Nice addition
Maudie Ritchie (verified owner) –
Seems to be a well made product for the price. I have been using it with an endmill for a poormans V mill.
Jon Rippin (verified owner) –
Works great, wish there was an easier/quicker to put on/take off drill table.
Maria Wisoky (verified owner) –
Great product.
Eliane Rodriguez (verified owner) –
only used it once so far , seems to be adequate , after some initial adjustments I think it will work fine for me. It won’t get used more then a few times a year , but is one of the tools that are hard to do without.
Talia Greenfelder (verified owner) –
I received this with no damage to it or the shipping box, opened it up and removed the vise, it was covered in grease which I expected. I tore it down completely and cleaned and reassembled. There is backlash in both the X and Y wheels which again I expected for the price of this vise. I adjusted to get as much backlash out as I could and it works great for my purposes. If you need to do precision work or milling then I think you need to go with something more expensive, but if your looking for something to move your work around on the X and Y axis this works great. Once cleaned adjusted and greased everything moves smoothly without binding.Hope this helps.