No products in the cart.
Stanley 3 in. Multi-Bit Ratcheting Screwdriver
$7.16
The Stanley 3 in. Multi-Bit ratcheting screwdriver includes 10 different bits that conveniently fit in the handle storage. The ergonomically designed handle offers comfort. It designed to resist corrosion, chipping and breaking.
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
This Stanley 3 in. Multi-Bit Ratcheting Screwdriver includes 10 different bits that conveniently store in the handle for quick and easy access on the job. The ergonomically designed handle offers comfort for your hand and maximum torque at the fastener head, while the magnetic bit holder allows for speedy and secure bit changing with little effort. Designed to resist corrosion, chipping and breaking, this high-quality screwdriver is built to last.
- Tips range from standard to Philips to Torx style to square for a precise fit
- Ergonomic, textured-finish handle achieves maximum torque with minimum effort
- Set includes 10 bits and bit storage system with #1 and #2 Philips, 3/16 in. and 1/4 in. slotted and T-15 and T-20 Torx to accommodate a variety of jobs
- Magnetic bit holder ensures speedy and secure bit changes
- Handle storage provides quick and easy access to bits
- Materials designed to resist corrosion, chipping and breaking for a long life
- Durable construction
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 0.72 lbs |
|---|---|
| Dimensions | 10.75 × 3.83 × 2.25 in |
| Assembled Depth (in.) | 3.5 in |
| Assembled Height (in.) | 1.7 in |
| Assembled Width (in.) | 4 in |
| Drive Style | Combination |
| Hand Tool Type | Individual or Specialty Screwdriver |
| Handle Length (in.) | 7 |
| Handle Material | Plastic |
| Individual/Set | Individual |
| Magnetic Tip | No |
| Maximum tip size | 1/4 in. |
| Minimum tip size | 3/16 in. |
| Model | 68-010 |
| Number of Pieces | 10 |
| Ratcheting | Yes |
| Shaft Length (in.) | 3.0 |
| Tools Product Type | Hand Tool |
40 reviews for Stanley 3 in. Multi-Bit Ratcheting Screwdriver
Only logged in customers who have purchased this product may leave a review.
Related products
Screwdrivers & Nut Drivers
Klein Tools 7-Piece Magnetic Nut Driver Set with 3 in. Hollow Shafts- Cushion Grip Handles
Model# 631M
Screwdrivers & Nut Drivers
Klein Tools #1 Phillips Head Screwdriver with 3 in. Round Shank- Cushion Grip handle
Model# 603-3
Screwdrivers & Nut Drivers
Klein Tools 3 in. Nut Driver Set with Cushion Grip Handles (7-Piece)
Model# 631
Screwdrivers & Nut Drivers
Klein Tools #2 Square- Recess Tip Screwdriver with 4 in. Round Shank- Cushion Grip Handle
Model# 662
Screwdrivers & Nut Drivers
Klein Tools #1 Phillips – 3/16 Inch Slotted Replacement Bits
Model# 32482
Screwdrivers & Nut Drivers
Model# 630-5/8
Screwdrivers & Nut Drivers
Klein Tools 5-in-1 Screwdriver/Nut Driver- Cushion Grip Handle
Model# 32476
Screwdrivers & Nut Drivers
Klein Tools 1/4 in. Flat Head Screwdriver with 4 in. Square Shank- Cushion Grip Handle
Model# 6004
Kailey Frami (verified owner) –
The best part about this is that it’s a ratcheting screwdriver, with quite a few bits to choose from, and better yet, the bits are stored in the screwdriver itself. It came with some sort of mounting device, but I didn’t use it.It has two storage areas, one around the barrel of the screwdriver on the outside (“external storage”), and a second storage compartment (“internal storage”) that is accessed by by unscrewing the cap on the handle. The external storage compartment is accessed through a rotating ring. That ring keeps the bits in place, and you can rotate it to access one specific screwdriver bit. In practice though, bits in external storage are hard to get out no matter how you turn that ring (though turning it upside-down is marginally helpful). The bits inside the screwdriver are much easier to access, and is where your most frequently used bits should go.I gave it a “Quality=Average” rating for not being able to release the external storage bits — seems like it wasn’t designed quite right. Otherwise it seems fairly sturdy for small projects around the house.
Reina Oberbrunner (verified owner) –
The Stanley 3 in. Multi-Bit is very convenient and easy to use.
Hertha Jacobi (verified owner) –
GREAT PRODUCT. EASY TO USE AND VERY STURDY. I USE IT WITH A LOT OF TORQUE AND IT HOLDS UP GREAT.
Kelsie Fahey (verified owner) –
I have had these screwdrivers for Many years for servicing rental properties & general use and just LOVE them. The rubber is so comfortable and the ratcheting mechanisms & bit holder is great! No issues with any of them…. until the newer (more plasticy) version was released. I’ve had 2 of these, and I think BOTH of them just had the shaft fall right out, no pressure or anything. I can’t even see how it could hold into the handle. Also the new ones have either too tight of an exterior bit holder, or it’s MAGNATIZED- both very bad ideas (you can’t get bits out anymore). Old model rocks, new model, bad. Stanley did replace them right away, but the hard plastic is not as comfortable as the older ones that were more rubbery. Hope this helps!
Darian Cartwright (verified owner) –
Works perfectly. Now my husband can keep his tools and I have this for me.
Garrett Carroll (verified owner) –
Came with a reasonable supply of bits, but the on board storage of same makes the device a little awkward to use, as does the relative difficulty of changing the direction of the action without using both hands. But hey….it was cheaper than buying a whole set of screwdrivers.
Kory Schoen (verified owner) –
Love it. Use it all the time.
Alvena Rolfson (verified owner) –
I receved this as a gift several years ago and it has been my goto screwdriver for any small job in the house. It’s helped fix everything, from shelving and toys to pot handles. It has all the bits I need in one hand. No more trips to the shed in Winter.
Cameron Lueilwitz (verified owner) –
Grear Multi-Bit Ratcheting Screwdriver for the price. I have several for personal use and they have lasted for years.
Cameron Kihn (verified owner) –
Perfect for what I was looking for. Longer shaft to reach some specific screws on my Thule rack. I like all the extra bit storage as well and it seemed to be less expensive than other similar tools.
Muhammad Jacobi (verified owner) –
I really don’t have a lot to say, but I really like this tool and I love the built-in storage for additional bits…
Verna Pacocha (verified owner) –
I love this ratcheting screwdriver. It comes with enough heads to be used for almost anything and it is easy to use. Perfect weight.
Wilbert Bernier (verified owner) –
This is the second one and he loves it.
Rachelle D’Amore (verified owner) –
I use this tool everyday in a handy man business. I end up losing the tool before wearing it out. The bits are easy to quick change and there is more bit storage inside the handle.
Trevion Ledner (verified owner) –
I bought this screwdriver about a year ago and I love it. I found myself reaching for it every time I had a small project where a big impact driver was too much.
Judson Corkery (verified owner) –
I bought the older version of the 68-010 years ago and liked it so much I bought several more so that I could have one at home, at work, one in each vehicle etc. The tool is well made and very sturdy, never any problems with the ratcheting mechanism. Excellent value! I’ve had these for many years and they all still work great!
Tristian Fadel (verified owner) –
It’s sturdy and has a good grip. Easy to switch from the left and right drive, but it is a bit bulky. You can’t really fit 5hat many heads in the storage area because of the design on the inside, and the plastic tabs break easy on the cap lid for some reason. The bits on the head are difficult to get out, but all in all, it’s sturdy and does the job. I would recommend this for the price.
Eunice Jacobi (verified owner) –
this product allows keeps everything together as far as a screwdriver goes. no need to have multiple screwdrivers – just change out the head for the size and shape you need.
Mattie Jacobson (verified owner) –
This ratchet was exactly what I was looking for
Leila Schaden (verified owner) –
I have been using this multi-blade screw driver for many years. My old one just wore out after some 10 years. Would not ratchet on or off. This replacement is exactly like my old one. A screw driver with fixed and ratcheting action for screwing in or out. Comfortable handle with ability to press lots of torque. Convenience of having multiple tips available in your hand on the job is great news. For most applications you only need this one screwdriver on the job.