No products in the cart.
QEP 5/16 in. Diamond Hole Saw with Water Delivery System
$11.98
Complete your tile installing work perfectly and professionally with the assistance of this amazing QEP 5/ Diamond Hole Saw with Water Delivery System.
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
Use the QEP 5/16 in. Diamond Hole Saw Kit to drill holes for bathroom pipes on various tile surfaces. In addition to the hole saw, the kit contains adhesive pads, a water cooling system and drill guide. This hole saw must be used with the water system to keep it from overheating and must be used with a cordless drill.
- Drills 5/16 in. holes in ceramic, glass, marble, porcelain and granite
- Tough, diamond grit cutting edge for long lasting use, limited wear, faster cuts, less dust and less chipping
- Water cooling system keeps hole saw cool for a longer life
- Convenient, single piece water delivery system
- Kit includes 6 adhesive pads, water cooling system, drill guide and drill bit
- Only for wet use with cordless drills
- Easy to clean by rinsing with hose or in clean water after each use
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 0.11 lbs |
|---|---|
| Dimensions | 1.10 × 4.50 × 9.40 in |
| Blade Length (in.) | 0.3125 in |
| Blade Material | Steel |
| Blade Width (in.) | 2 |
| Hand Tool Type | Blade |
| Individual/Set | Individual |
| Model | 10571 |
| Number of Pieces | 1 |
| Product Length (in.) | 0.75 in |
| Replacement Blade Type | Fixed Blade |
| Teeth Per Inch | 0 |
| Tools Product Type | Power Tool |
68 reviews for QEP 5/16 in. Diamond Hole Saw with Water Delivery System
Only logged in customers who have purchased this product may leave a review.
Related products
Knives & Blades
Model# 11-931A
Knives & Blades
Model# 46037SEN
Knives & Blades
Model# 48036
Knives & Blades
Model# 12-313
Knives & Blades
Model# RWK14D
Knives & Blades
QEP 8 in. Carbon Steel Replacement Blades for Floor Scraper and Striper (3-Pack)
Model# 62904Q
Knives & Blades
Model# DWHT11131L
Knives & Blades
Milwaukee General Purpose Utility Blades with Dispenser (100-Piece)
Model# 48-22-1900
Romaine Rohan (verified owner) –
The drill bit was purchased to install a shower curtain rod requiring drilling into porcelain tile. The water resevoir provided did not work. The water ran through the device before you inserted the drill bit. In fairness to the bit itself, it did eventually penetrate the tile drilling at 10 second intervals dipping in water between drilling intervals to cool it down.
Hailee Kulas (verified owner) –
I didn’t use the water box part but the drill bit was awesome. It cut a perfect hole in a 1/4″ thick glass and left the removed glass in the bit like a piece of wood. Awesome.
Leanna DuBuque (verified owner) –
We had to drill six holes for the shower door and eight more for the towel/toilet paper bars. By the end it was getting dull, but it really helped us cut into the tile. I recommend that you clean out the tile and mortar that builds up in the core of the bit after each hole or it gets packed in there.
Sandrine Monahan (verified owner) –
I realize it is tough to drill through tile, but I thought this would be helpful. The water part. I had to just use the bit without the water.
Mallory Waelchi (verified owner) –
Purchased this product after being very skeptical after reading past reviews… I used this drill bit to drill 6 holes for a new shower glass sliding door. I had to drill through 3/8th inch porcelain tile… I found the bit and the water system to work flawlessly…. The trick is to proceed at a slow speed and to keep the drill bit cool…. READ THE DIRECTIONS AND YOU WILL DO FINE….. This thing works!!!!
Berneice Dach (verified owner) –
Cut quickly thru quarter inch ceramic tile.
Alba Wolf (verified owner) –
used a carbide bit to start and easily finished with diamond bit. I was floor drilling
Jeanette Windler (verified owner) –
Works great
Herminio Rath (verified owner) –
End result was exactly what I wanted. Did a test run on an extra tile which proved very useful. Learned I wasn’t pushing the drill hard enough for fear of cracking the tile. Youtube – Mounting Shower Curtain Bar using a Water Cooled Hollow Diamond Drill Bit. Very helpful!
Orin Rolfson (verified owner) –
Good enough. I was able to drill 12 holes through porcelain subway tile. The box is flimsy plastic and does leak during use. Get yourself some regular 3M double sided sticky squares if you need to drill more than 8 holes.
Frida Stracke (verified owner) –
Had to drill through porcelain, much harder than ceramic. Apply pressure on the edges of the cylinder bit. Prepare for water spill also.
Clair Gerhold (verified owner) –
Worked great only bad thing is 1 hole out of each seal pad
Leo Bechtelar (verified owner) –
The bit did an adequate job on the porcelain tile, though it didn’t last very long before wearing out.
Destany Lesch (verified owner) –
simple, easy to use product, cut through tile with no problem. Could use a storage case to keep it all together.
Garnett Weber (verified owner) –
If I could give this item more than five stars I would, those who give it less, have not tried other options to drill through difficult tile. The most important comment is “IT WORKS”. Yes it is a little difficult to use, but again it works. Nothing else that I tried came close, and I spent more than $50 on other options. I renovated my shower with very hard Italian tile. I needed to drill screw holes and could not, until I tried this. it is a kit with drill and an excellent alignment/cooling device . I was not sure how many holes I could drill with the kit (I had many) so I bought two more. I would absolutely recommend it.
Milo Schiller (verified owner) –
The drill bit worked surprisingly well for a cheap diamond bit. I did 2 dozen holes and the last went as well as the first. The box and tape system was a joke, though. Nice idea, but…. I ended up using a spray bottle and tried to control the mess.
Schuyler Anderson (verified owner) –
We did a bathroom reno and were in the process of installing a DreamLine Aqua Ultra tub door. We needed to drill six holes in our new porcelain tiles. This little tool worked great! Follow the instructions and within 30 seconds you have a 5/16″ hole. I was hesitant after reading some of the reviews, but the people that gave negative feedback either did not follow the directions or were reality impaired and should not be working with tools. This product works exactly as stated and I would have paid double for the results. Instead of the drill skating all over the tile, the drill guide held the bit in position so there was no damage to the surrounding tile.
Jessika Schmidt (verified owner) –
I bought a 5/16ths and a 1/4 diamond hole drill from QEP. The 5/16ths was fine. The 1/4 is defective and would not cut anything. Apparently no imbedded diamond dust on the tip. The water resovoir is too small to hold enough water for a single cut through tile. I’ll avoid QEP.
Annabell Morissette (verified owner) –
With my new bathroom complete except for the shower door, we faced a tough job of drilling through porcelain tile in order to install the door correctly. After struggling with other tile bits, masonry bits, we finally got on line and did a little more research.We found this bit at Home Depot. For $10.00 it was worth my time to give it a try. We were able to drill the remaining 5 holes in a quarter of the time it took to drill the first 3. I was so happy with it, I passed the info on to my contractor so he can use one on his next job. The instructions were clear, and the bit performed as promised. In addition, we were able to use my battery powered drill. A high powered hammer drill was not required.
Howell Olson (verified owner) –
I needed to drill through very hard tile in my shower as I was installing grab bars. I tried other drill bits but this is the only one that did a good job. I used a corded electric drill. I recommend this product.