No products in the cart.
Induction Motor. 1/2 HP, 2.5 Amp, 1725 RPM, Blade Size: 62 in. x 1/8 in. x 3/8 in. Aluminum Die Casting Table Size: 11-3/4 in. x 11-3/4 in. Dust Port: 2 in., Throat Depth: 9 in., Maximum Depth of Cut at 90°: 3-5/8 in., Maximum Depth of Cut at 45°: 2 in. 50 lbs.
- Patented blade guard adjustment for quick and easy blade change
- Table with rack and pinion adjustment for easy tilt to 45°
- Blade tracking window
- Quick release blade tension lever makes blade changing easy (patented)
- Blade width range 1/8 in. to 3/8 in. increased versatility for scroll cutting and resawing
- Maximum depth of cut at 90°: 3-5/8 in., maximum depth of cut at 45°: 2 in.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 43.1 lbs |
|---|---|
| Dimensions | 31.10 × 17.70 × 11.00 in |
| Amperage (amps) | 2.5 |
| Maximum Speed (rpm) | 1725 |
| Voltage (volts) | 120 |
| Tools Product Type | Power Tool |
| Table-Top Material | Aluminum |
| Table Width (in.) | 11.75 |
| Table Tilt Right Max (degrees) | 45 |
| Table Tilt Left Max (degrees) | 45 |
| Table Length (in.) | 11.75 |
| Power Tool Features | Lockout Power Switch, No Tool Blade Change |
| Portability | Bench |
| PT Horsepower (Hp) | 1/2 |
| Model | BS900 |
| Minimum Blade Width | 0.125 |
| Minimum Blade Length | 62 |
| Maximum Blade Width | 0.375 |
| Band Saw Type | Vertical |
| Maximum Blade Length | 62 |
| Included Accessories | Allen Key/Wrench, Blades |
| Dust Port Size (In.) | 2 |
| Dust Collection Method | 2 in. Dust Port |
| Cutting Capacity Width / Depth Of Throat(In.) | 9 |
| Cutting Capacity Height / Height under Guide (In.) | 3-5/8 |
| Cuts Through | Wood |
| Cordless/ Corded | Corded |
| Cord Length (ft.) | 6 |
| Construction Material | Steel |
| Condition | New |
| Color Family | Blue |
| Bench & Stationary Tool Type | Band Saw |
| Work Table Surface | 11.75 in. x 11.75 in. |
2 reviews for POWERTEC 9 in. Band Saw
Only logged in customers who have purchased this product may leave a review.
Related products
Saws
Model# DW716
Saws
Model# 6955-20
Saws
Model# JR3070CT
Saws
RIDGID Thru Cool 6 Amp 1-Handed Orbital Reciprocating Saw Kit
Model# R3031
Saws
Model# 1590EVSK
Jada Zieme (verified owner) –
It’s ok for a starter but don’t plan on resawing anything. A 1/8″ blade does ok, a little hard to balance. It will cut circles and rarely bogs down. The 1/4″ blade is about the best overall but you will have plenty of drift. While it says it does 3/8″ blades, the thrust bearing is almost in constant contact with the blade even with the blade far forward. It doesn’t help for drift much so I can’t say I recommend the 3/8″ blade. I wish it had bearing guides as the blocks just don’t do a good job. One big annoyance on this saw is the table. While you can square it, the lock isn’t great. I wouldn’t use it at anything other than 90 degrees if you need accuracy. Also, the insert around the blade is below the table top by about 1/32″. The result is wood will hang when being fed. I also regret not having a fence. This product is identical to the Ryobi, though the Ryobi seems to lock the table better.
Natalie Batz (verified owner) –
This is an inexpensive band saw for a hobbyist. I will need to tweak it some to get the table perpendicular to the blade. It will work fine for light use. The blade guides (left/right) appear to be plastic and not as sturdy as more expensive saws that use bearings on the sides of the blade also.