Saw with more cuts and fewer blade changes with Milwaukee 44 7/8 Extreme Thin Metal 12/14 TPI Band Saw Blades. The variable pitched tooth design lets you cut more metals of different thicknesses with the same blade, with 3X life in stainless steel and other extreme metals. It makes fast, clean cuts in common materials, giving you the performance you want in a single blade. This band saw blade pack contains 25 blades for portable deep cut band saws.
- Cuts more materials
- Aggressive tooth design for 2X faster cuts in thick metals
- 25% more cuts per charge
- Variable TPI cuts more materials
- Optimized tooth design for clean cuts
- One blade for all metal thicknesses
- 44 7/8 in. length – fits any saw this size
- Includes: Extreme Thick Metal 8/10 TPI Band Saw Blades 25PK – Deep Cut
Emilia Reinger (verified owner) –
The 44-7/8 in. 12/14 TPI Metal Deep Cut Portable Extreme Metal Cutting Band Saw Blade (25-Pack) is a great deal from Milwaukee and comes in a convenient card board packing that also doubles as a storage case for the blades with a cutout in the middle to take blades out and also easy to hang on walls or lay flat.The blades cut great and are very durable I have made at least a 100 cuts in 1/8 square tubing and still cutting strong.
Misael Stroman (verified owner) –
These blades were ordered through Home Depot. They arrived in perfect shape. These blades fit a work very well on my 6232 Milwaukee Deep Cut Band Saw, I use these medium tooth blades to do demolition rough cuts on just about everything, and finer cuts on wood. I’m still on the first blade but it’s nice to have spares! Good job Milwaukee! I recommend these! I got the 24 TPI blades as well.
Rae Conroy (verified owner) –
I RECOMMEND for fence building!!!These blades are super sharp an cut through steel like BUTTER I SAY, BUTTER WOW!!!!
Treva Upton (verified owner) –
Best blade for the job
Leda Ruecker (verified owner) –
It fits my saw and cuts stuff!
Trinity Jacobs (verified owner) –
blades didn’t seem to last nearly as long as the last box I bought of the same exact ones
Carson Watsica (verified owner) –
Cut right through the steel like butter
Forest Lang (verified owner) –
I have been using the 10/14 TPI to cut pipe. The 8/10 not only cuts the pipe faster it last about double the amount of cuts.
Isaiah Yost (verified owner) –
High quality saw blades as all Milwaukee products I’ve used before. I really like the company because their instruments can use any DIY person reaching good results. Say true, I don’t need to cut a lot of metal and I don’t do it too often. So I cannot tell how long it will last for a professionals, but for me it will work forever. It’s easy to install and it makes nice cuts. I am impressed by the cutting speed and easy operation.
Eliseo Champlin (verified owner) –
I used these high quality blades to cut 1/8 mild steel angle iron and they did a great job. The tooth count is made for cutting thinner metals and they cut the angle like it was butter. I was making several brackets and had a over a dozen cuts to make and the blade was just as sharp on the last cut as it was on the first. Buying in volume save you just over a dollar per blade so if you do a lot of fabrication like I do volume is the way to go.
Francesco Douglas (verified owner) –
the price was great will buy then again
Trey Ortiz (verified owner) –
I had no problem cutting through several dozen pieces of 2 inch diameter .120 DOM tube. The 12/14 pitch cuts clean, and makes for a fast cut, about 30 seconds per tube. I also sliced up a few pieces of a 4×4 square .120 wall tube and it went through like butter.The blade’s weld is good quality, flat, and ground to correct thickness. It is a little rough though, and I found that smoothing it quickly with some fine sandpaper helps a bit. But in general it doesn’t catch / hiccup much when the weld goes through, it just cuts.So far there are no signs of early wear, the blade is still as sharp as ever. I usually use Morse brand blades, but I’ve been using more and more Milwuakee brand, and their quality seems to be very good.
Justus Bergstrom (verified owner) –
I love my new Milwaukee 44-7/8 in. Extreme Thin Metal 12/14 TPI Band Saw Blades. The blade is made from stainless steel to be able to make more cuts. This blade walked through a piece 3/8-inch-thick structural steel that I’m using to make into a new shoe for a snow plow attachment. The blade worked so well I’m wondering how thick “Thin Metal” is supposed to be, 3/8 of an inch was no problem. In my project I’m cutting the corners off a square piece of steel, so I don’t have to grind as much to make it a round disc. I would recommend the new Milwaukee 44-7/8 in. “Extreme Thin Metal 12/14 TPI Band Saw Blade” for your deep cut bandsaw.
Evert Hane (verified owner) –
As always from this great company, these are great long lasting and fast cutting blades! They easily cut through thick metal and do it fairly quickly too! They aren’t designed for thin metal so if you can only get one type of blade I would get the thin metal blades since you still can cut thick metal with those it will just take more time. These thick metal blades catch on real thin metal.
Rico Hudson (verified owner) –
These blades are awesome. I purchased these blades to cut Unistrut. I was using a Dewalt blade that came with my Dewalt saw that was a 18 tooth per inch blade. It cut well but was slow. I bought these and what a difference I set my saw on speed 3 and it takes just a few seconds to cut through the strut. definitely worth the money. The blades seem to last longer also.
Anastacio Lueilwitz (verified owner) –
This Milwaukee blade is perfect for cutting pipe, bolts, steel rod, PVC pipe and even large gauge electrical wire. I find that the 10 TPI blades are superior for softer materials and the 12-14 TPI blades are the best for solid steel an even work on hardened steel. They last really well until you really push them with hardened steel. Use the slow speed. Using the band saw is much safer and neater than using a cut off wheel in a angle grinder. I find cable and large electrical wire cut easiest if you put them in a vice. I really love my Milwaukee band saw.
Terrell Bradtke (verified owner) –
I had a chance to use one of my new Milwaukee Deep Cut Portable Extreme Metal Cutting Band Saw Blades today. All I can say is the blade walked through a piece of 4×4 inch square tube, ¼ inch thick steel like a hot knife through butter. There was no chatter, no binding, no problems. The blade just walks through the steel progressing with a nice steady pace. The first cut almost looks like it was milled. My second cut wasn’t as good but that was due to operator error.The teeth on the blade has a 8/10 TPI aggressive variable pitched tooth design. The blade is made from stainless steel to provide more cuts before needing to be replaced. I would definitely recommend this blade for cutting thick metal tube or bar stock. I love my deep throat Milwaukee band saw.
Sydnee Shields (verified owner) –
Very nice blades, well made, and heavy duty, and, they are made in the U.S.A.! If you have a deep cut, portable band saw, and you need to cut THICK metal, these 44 7/8 inch high speed steel bands are the blades you need, and when you buy the three pack, you save money! They are best used for Cast Iron pipe, Angle Iron, Threaded Rod, Sched 80 and 40 pipe, Stainless Steel pipe, Steel Bar stock, Copper, and Unistrut.
Edgar Hoeger (verified owner) –
Milwaukee came out with the new extreme thick metal deep cut bandsaw blades. When I saw these I knew I wanted to try them out on my deep cut band saw. I ordered a box of 25.My order came in, I open the box and the blades were in a box too. The box was 17-1/2 in. L x 10-1/2 in. W x 3/4 in. H. On the top side of the box there is a perforated opening this is so you don’t have to pull all the blades out at once to get one blade. This opening allows you to get one at a time for convenience. This is a well thought-out design for the Box.I pulled a blade out of the box and it is 47-7/8 in. L x 1/2 in. W. It has an aggressive variable pitched tooth design that is 8/10 TPI = ( teeth per inch ) There is approximately 432 teeth on each blade and they are very sharp. I love the fact that I won’t have to change blades for different metal thicknesses anymore because this blade is made for All Metals thicknesses.I cut a couple pieces of galvanized pipe and it cuts fast and clean. I was impressed with these extreme blades. Milwaukee also did an excellent job on the welding of the two ends of the blades together and a nice smooth grinding of the welds. Milwaukee says these blades are 3X life and it will give you more cut and less blade changes, I am looking forward to that.Milwaukee did an outstanding job on giving us a high-performance portable bandsaw blades. These blades will keep us more productive out in the field. Milwaukee gets 5 stars from me on the extreme blades. I do recommend these blades 100%.
Cornell Barrows (verified owner) –
Works great in my Milwaukee portable bandsaw. Cuts through metal with ease. Tin and other thin metals will cut, but you have to go very slow. Very little flex while cutting with these blades. Excellent quality compared to some I have used. As long as you keep the correct tension on these blades they should last quite a while. I highly recommended blades.