No products in the cart.
The Milwaukee 1/2 in. x 4 in. x 6 in. SHOCKWAVE Carbide Hammer Drill Bit uses sharpened carbide to deliver up to 5x longer life in concrete and up to 2x faster drilling into masonry materials. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick and block. The carbide-tipped masonry drill bits’ wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a 1/4 in. Hex Shank, Milwaukee SHOCKWAVE Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers.
- Durable carbide tip for longer life in concrete and hard aggregate
- Sharpened carbide edges for faster starts in concrete, brick and block
- Precision ground carbide tip for less bit walking
- Wide flute design removes dust faster reducing heat & delivering more holes per charge
- Ideal for concrete, brick and block
- 1/4 in. hex shank for added tool versatility
- Available in sizes up to 1/2 in.
| Weight | 0.16317 lbs |
|---|---|
| Dimensions | 0.51 × 1.87 × 7.97 in |
| Assembled Depth (in.) | 6 in |
| Assembled Height (in.) | 0.5 in |
| Assembled Width (in.) | 0.5 in |
| Bit Diameter | 1/2 in |
| Bit Length (in.) | 6 |
| Bit Material | Carbide |
| Drill Bit Type | Hammer Drill Bit |
| Drill Bit Type(s) Included | Hammer Drill Bit |
| Individual/Set | Individual |
| Material Application | Brick, Concrete |
| Model | 48-20-9030 |
| Self-Feeding | No |
| Shank Diameter | 1/4 in |
| Shank Style | Hex |
45 reviews for Milwaukee 1/2 in. x 4 in. x 6 in. SHOCKWAVE Carbide Hammer Drill Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# 48-25-2252
Drill Bits
Model# 48-28-1010
Drill Bits
Model# DW2046 G
Drill Bits
Model# DW2043 Z
Drill Bits
Model# 48-20-8856
Drill Bits
Model# 48-25-2122
Drill Bits
Milwaukee 1/4 in. X 3-1/2 in. Pilot Drill Bit For Hole Saw Arbor
Model# 49-56-8010
Drill Bits
Model# FB-003
Janie Casper (verified owner) –
Handyman didn’t show. So I purchased drill and bit to drill hole through brick to re-attached shutters. Very easy to use. Home Depot member helpful
Frankie Kunze (verified owner) –
Very tough and we’ll made bit.
Isabelle Terry (verified owner) –
The veteran Bill of Home depot Little Elm Dallas TX helped me to get the correct concrete bolts. He even advised me to get the correct drill bit and hamer drill machine. My project was completed with success.
Emerald Smith (verified owner) –
Great for concrete!!
Mercedes Ortiz (verified owner) –
did great for the job that i was doing
Arvilla Yundt (verified owner) –
Worked as expected !
Rosemarie Johnson (verified owner) –
Very strong and durable masonry bit.
Annamae Treutel (verified owner) –
Yes I recommend this product
Kaela Hermiston (verified owner) –
I’ve only drilled about 10 holes in concrete, but it still cuts like butter and shows no sign of needing to be sharpened. Very pleased.
Euna Emmerich (verified owner) –
The drill worked great! I needed to drill through my concrete wall so I can hang my TV outside in my patio and this drill did the job.
Brent Considine (verified owner) –
Works very well. It does what it’s supposed to do!
Mateo Purdy (verified owner) –
Awesome 1/4 in shank concrete/ brick hammer drill bit. Will penetrate anything!!
Mable Rempel (verified owner) –
Went through like concrete like butter
Alec Hessel (verified owner) –
This is a good drill bit as long as you take it slow and steady when punching through concrete. If you run this bit high speed it takes a little longer than running low speed, it seems to bite better lower speed. I was able to get 150+ holes into cinder block with this bit so far. I would recommend this high quality bit.
Jade Fahey (verified owner) –
A well-made masonry drill bit did in seconds what several other, cheaper drill bits failed to do in far more time. Save yourself the trouble and buy the right tool for the job.
Alexandrine Beahan (verified owner) –
This drill bit came in handy for drilling into concrete. They stay sharp and work well. I will buy more in different sizes in the future.
Brooke Hackett (verified owner) –
I had no problems with the carbide..Excellent tool no issues.
Brady Kuvalis (verified owner) –
Made drilling look so easy with appropriate drilling RPM speeds. I drilled about 15 holes and all came out very clean with no chipping at the top surface layer.
Daphnee Ullrich (verified owner) –
It is very versatile, durable and of good quality.
Kenneth Balistreri (verified owner) –
Managed to penetrate the high density brickwork in our old house to lag a half wall and Dutch door pet divider project. These walls have filled and snapped other bits.