No products in the cart.
The MILWAKUEE® M18™ FORCE LOGIC™ 10 Ton Knockout Tool Kit reduces the tedious steps of hole making, improving user speed and limiting user fatigue. This knockout punch tool is powerful enough to punch up to 6” holes in 12 gauge mild steel and 14 gauge stainless steel. The Quick Connect Alignment System provides users with easy set-up without the weight of the tool and speeds up repetitive punching. The tool is compatible with all Milwaukee EXACT™ punches and dies. The knockout dies are rated for both mild and stainless steel punching. Vivid red cross hairs provide users with accurate alignment and slug removal ports provide optimal slug removal. The gripping surface on the EXACT™ punches enables users to thread faster. The cordless 10-ton knockout tool delivers the Easiest Way to Punch.
- Powerful hydraulic pump delivers up to 10 tons of force
- Powerful enough to punch 6″ Holes in 12 gauge mild steel, and 14 gauge Stainless Steel
- Part of the M18™ System, featuring over 200+ tools
- Quick Connect Alignment System speeds up alignment by delivering the easiest set-up, and enabling the clearest view of the work surface
- EXACT™ Punches and Dies are rated for both mild and stainless steel punching
- EXACT™ Dies feature vivid red cross hairs for clearest alignment
- Large size ID markings permit easy punch and die selection
- The tooth geometry of EXACT™ Punches, and Slug Removal Ports in EXACT™ Dies, deliver optimal slug removal
- Compatible with competitive accessories
- Compatible with all M18™ batteries and M18™ chargers
- Includes: 2676-20 M18™ FORCE LOGIC™ 10T Knockout Tool, 7/16″ Draw Stud, 3/4″ Draw Stud, Quick Connect Alignment System, Adapter for Other Major Brands of Punches and Dies, (2) M18™ REDLITHIUM™ XC Extended Capacity Battery Pack, M18™ and M12™ Multi-Voltage Charger, and Carrying Case
| Weight | 20.21 lbs |
|---|---|
| Dimensions | 6.39 × 23.40 × 18.36 in |
| Amperage (amps) | 0.0 A |
| Batteries Included | Yes |
| Battery Power Type | Lithium Ion |
| Battery Size | 18-volt |
| Battery/Charger | 2 Batteries Included |
| Charger Included | Charger Not Included |
| Condition | New |
| Cordless Tool Type | Specialty |
| Cordless/ Corded | Cordless |
| Model | 2676-20 |
| Number of Total Batteries Included | 2 |
| Power Tool Features | No Additional Features |
| Tools Product Type | Power Tool |
8 reviews for Milwaukee M18 18-Volt Lithium-Ion Cordless FORCE LOGIC Knockout Kit with (2) 3.0Ah Batteries, Charger, Hard Case
Only logged in customers who have purchased this product may leave a review.
Related products
Metalworking Tools
Model# 2677-21
Metalworking Tools
Model# 2677-23
Metalworking Tools
Model# 2676-23
Metalworking Tools
Model# 2677-23-2829-20
Metalworking Tools
Model# 2677-23-2853-20-48-89-9256
Metalworking Tools
Model# 2676-23-2829-20
Metalworking Tools
Hilti 22 Volt 100kN NPU 100 IP-A22 Lithium-Ion Cordless Knockout Punch (Tool Only)
Model# 2163390
Metalworking Tools
Model# 2677-20
Berneice Ruecker (verified owner) –
This product is amazing. Went from a greenlee hand pump hydraulic kit to this. The m18 knock out is at least half the weight and so much faster. I use all my greenlee punches. I even punched at least 20 4″ holes with the m18 and haven’t changed a battery. Its gets the job done neat and clean.
Jamel Bailey (verified owner) –
Today’s electrical panels have too few knockouts due to the physical size of the panels. To overcome this, I use either a 4″x4″ or 6″x6″ trough and punch as many holes as needed to accommodate all the cables and conduits. This tool is made for this. What would take 1/2 day to do with the hydraulic punch takes 30 minutes with this tool. The ONLY downside is that Milwaukee really doesn’t make it clear that one MUST use the 49-16-2260S and 49-16-2661S Punch and die to make the 1/2″ hole. That SS set uses the 49-16-2680 7/16″ draw stud instead of the 3/8″ draw stud the competition uses. Other than that little description anomaly, this tool is fantastic.
Augusta Schimmel (verified owner) –
Fast easy tool to use and make the job quick
Dane Kub (verified owner) –
I am a commercial electrician and this product has saved me so much time and effort for knocking out holes, I used to have to use a hydraulic k/o set, this tool has saved me so much physical work vs the hydraulic set that at the end if the day I am good to go the next day without being sore. It also saves so much time, I can punch out holes in about one tenth of the time, I highly recommend this product for commercial/industrial electrician s
Tyson O’Kon (verified owner) –
This tool and kit might be expensive, but the money you lose up front saves money in time by the end of the day. It’s ten times faster than hydraulic knockouts and twice as clean.
Wilfredo Schumm (verified owner) –
My boss bought me the 1/2” to 4” set a few years ago and I love it, extremely fast. I also find it safer when punching a live cabinet vs using the greenlee with the pump and the hose dangling, you can put the cup draw stud and screw the cutter on, then tighten everything and then get the pump and punch the hole. Milwaukee is so much easier best tool they have invented
Matt Waelchi (verified owner) –
I am an industrial inside wireman. This is the best knockout set I have EVER used. Makes the job faster and easier on an old man. I regularly use the 1/2 inch up to 6″ on stainless junction boxes. I have never had a issue, and the red line cup combined with the LED light makes it easy without have to pull my “cheaters” out of my shirt pocket! I will buy this tool again if and when needed.
Chelsea Metz (verified owner) –
I’ve had mine for over a year and I use it regularly for up to 2” holes. It works well, but almost every time it doesn’t pull all the way through and has to be done on 2 steps. It just needs another 1/8” of travel or so. I’ve resorted to using a spacer, but it seems like they should’ve been able to fix this before it was put to market.