No products in the cart.
Milescraft DrillMate Portable Mulit-Anlge Drill Guide for Euro Style Drills with 43 mm Neck Diameter
$30.68
Drill straight holes every time by selecting this durable Milescraft AccuDrillMate Portable Drill Stand for Euro Style Drills.
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
A portable drill stand for use almost anywhere, now you can drill straight holes all the time. With the DrillMate drilling straight or angled holes, drilling on the edge of a board or even round stock has never been easier. This all metal construction DrillMate drill guide provides the precision of a drill press with the ease of a hand drill.
- For Euro style drills with a 43m neck diameter
- Complete control, self-centering and precise depth setting for repetitive drilling
- Easy to read scale permanently cast into aluminum base, with fixed angle settings of 45°, 60°, 75° and 90°
- Spring action controls the rate of drill penetration and return
- Removable handle adds control for a variety of applications
- Drill stand base is formed for exact centering on round or flat edges
- Adjustable depth stop for drilling holes to a precise depth
- Portable drill guide jig, for drilling accurate angles and depths
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 3.56 lbs |
|---|---|
| Dimensions | 2.00 × 7.25 × 16.88 in |
| Bench & Stationary Tool Type | Accessory |
| Ideally Used With | Power Drills |
| Model | 1368 |
| Tools Product Type | Power Tool |
10 reviews for Milescraft DrillMate Portable Mulit-Anlge Drill Guide for Euro Style Drills with 43 mm Neck Diameter
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tool Accessories
Model# DR12156
Woodworking Tool Accessories
Model# DR30114
$31.37
Woodworking Tool Accessories
Milescraft Sign Crafter Complete Sign Making Router Jig Template Kit
Model# 1206
Woodworking Tool Accessories
Model# DR82116
$56.97
Woodworking Tool Accessories
Model# DR04132
Woodworking Tool Accessories
Model# DR75102
Woodworking Tool Accessories
Model# DR30110
$27.32
Woodworking Tool Accessories
Model# DR18104
Leonard Macejkovic (verified owner) –
Fits the metabo perfectly.A few caveat: – plunging requires much more force than without the stand – The depth setting is not perfectly accurate, expect about 0.5mm-1mm of slack. – with short bits, the plunging depth is quite short. – I swapped the screw for butterfly nuts, for easy use
Luigi Schiller (verified owner) –
exactly what i wanted
Kieran Reichel (verified owner) –
It worked very well for my project.
Jenifer Heidenreich (verified owner) –
I used it with a hammerdril and a jig I made. After 176 stones that needed a hole drilled into it still going strong. I still have over 300 more stones to do, I’ll let you know it does after that. I would think about taping plate behind the retaining cover for the drill. I had to super glue the Nut behind the back plate because the vibration was loosing them up.
Gabe Effertz (verified owner) –
It works GREAT as long as you use the type of drill it fits (43mm round collar behind the chuck, and AFAIK, these are always corded drills, almost always hammer drills).The poor reviews are not justified, but are due to people who didn’t understand what type of dril this fits.
Beaulah Beier (verified owner) –
Fits the metabo perfectly.A few caveat: – plunging requires much more force than without the stand – The depth setting is not perfectly accurate, expect about 0.5mm-1mm of slack. – with short bits, the plunging depth is quite short. – I swapped the screw for butterfly nuts, for easy use
Logan Jaskolski (verified owner) –
It worked well for what I was doing but if you are needing a precise angle invest into a higher calibrated tool.
Antonina Parker (verified owner) –
First of all, please note, this drill will only work with some european drills. With that said, the only one I found was the Bosch corded drill which you can find here in the US cheap (but they may be discontinued soon and the new Bosch drills will not fit). I decided to go with this version rather the one with a attached drill vise which seemed too shaky by attaching any drill onto the unit. By getting the Bosch, the assembly was more secure and more accurate. I was drilling a number of dog holes for an assembly table i was making and it does make drilling 90 degree holes easier. And drilling 200 holes and trying to get them all perfect by hand is challenging. So, this helped out alot. You still need to use some care and don’t expect it to make the holes automatically, but its a good tool if used correctly.
Aidan Fahey (verified owner) –
Disappointed that my two drills did not fit within the opening. Can’t afford to pay for extra drill with the correct neck diameter. But, with a couple of shims was able to make the Drillmate work okay. Won’t return, but will not recommend this product unless the person has a drill that will fit its!
Kyleigh Hane (verified owner) –
Very pleased with the quality for the price. Does exactly what I hoped it would