No products in the cart.
Mayhew 2-1/4 in. x 7-3/4 in. Mason Chisel
$10.78
Mayhew Tools – 2-1/4 in. x 7-3/4 in. Mason Chisel – True industrial grade tool with a precision ground cutting edge. Alloy steel construction. Heat treated for quality and performance. USA – THD SKU# 386837
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
Used for cutting, shaping, and removing block or stone, this is a true industrial grade tool that is 100 pecent Made in the USA. Utilizing high carbon steel for strength and durability, and heat treated with a fully automated infrared controlled process, this tool is then finished with a rust preventative coating for years of exceptional use.
- 100% Made in the United States
- True industrial grade tool
- Alloy steel for hardness and durability
- Multiple forged tool for additional strength
- Precision ground cutting edge
- Automated, infra-red controlled heat treated tool for quality and performance
- Rust preventative coating applied to steel for additional protection
| Weight | 0.65 lbs |
|---|---|
| Dimensions | 0.72 × 3.25 × 10.98 in |
| Assembled Depth (in.) | 7.5 in |
| Assembled Height (in.) | .5 in |
| Assembled Width (in.) | 2.25 in |
| Chisel Tip Style | Flat |
| Chisel Tip Width (In.) | 2-1/4 |
| Hand Tool Type | Chisel |
| Individual/Set | Individual |
| Model | 35702 |
| Tools Product Type | Hand Tool |
24 reviews for Mayhew 2-1/4 in. x 7-3/4 in. Mason Chisel
Only logged in customers who have purchased this product may leave a review.
Related products
Chisels, Files & Punches
Model# G334
Chisels, Files & Punches
Model# 66106
Chisels, Files & Punches
Mayhew 3/4 in. x 12 in. Guardian Handguard Bull Point Chisel
Model# 80205
Chisels, Files & Punches
Model# 66124
Chisels, Files & Punches
Model# 35705
Chisels, Files & Punches
Model# G480
Chisels, Files & Punches
Model# 473-0
Chisels, Files & Punches
Model# 94202
Jerald Morar (verified owner) –
worked as expected
Albertha Fahey (verified owner) –
Purchased for something other than splitting bricks. After fine tuning the edge, it worked perfectly.
Veda Dickens (verified owner) –
Worked well.
August Raynor (verified owner) –
We are using the chisel to remove mortar from old ornamental stones that have to be reinstalled. The chisel removes all the mortar build up quite easily. We use a rubber mallet to hit the chisel. The construction of the chisel is industrial grade with high quality steel and protective coating. It is made in America. So far the chisel has stayed sharp and has no pits in the edge.
Waino Schowalter (verified owner) –
I used the chisel to help remove steps from my back deck. The chisel worked well to get under the steps to lift and loosen the nails for easy removal.
Rosella Stark (verified owner) –
This is a well made chisel! The tip is still sharp after a bit of work on concrete and brick. I don’t do any professional masonry but I’ve used it quite a bit since I’ve had it and there’s almost no sign of wear whatsoever. It has substantial weight and a slightly angled edge and the size works very well for me (not too big, not to small) I can use it for some detail work as well as splitting. I like it and definitely recommend it!
Ezra Walker (verified owner) –
This is a nice mason chisel I picked up to Take apart an old chimney on a 100 year old house that I wanted to save the bricks from.It is made of cast and heat treated steel then bead blasted to a dull gray.It has a single edge to cut bricks to size and the haft gives you lots of room to hold onto when striking with a hammer.I used it to chisel out the old mortar from the chimney and it worked out perfect for the job I needed.
Prince McGlynn (verified owner) –
I use this chisel to remove broken or small areas of floor tile from concrete floors. The chisel is also great for removing the thinset from the concrete floor. It stays sharp and strong. When removing the tile we wear long gloves, eye protection, respirator and we wet the thinset to keep the dust down. Works great for smaller areas.I also used it on a concrete landscape block I had to cut. I scored the block on four sides and then with one swift hit the block broke perfectly on the score mark! The only negative is I wish it a little wider on top to make striking it easier. My hammer slipped off a few times and my hand has some bruises. As is it deserves four stars.
Delphia Little (verified owner) –
The Mason Chisel arrived at a great time. Had to do some brick work and the mason chisel worked just terrific. I like the double edge chisel. Easy to score the brick and then just hit it once and your brick is ready to set in place. Arrived with great packaging and not damaged. It was easy to use and very durable. Made of a great quality steel and seems to last for a long time. I like that it was made in the good old USA. Great tool.
Terrill Sawayn (verified owner) –
Was a sharp and easy to use chisel
Joan Von (verified owner) –
high quality American Made mason chisel . Mayhew 2 1/4 inch wide blade is Ground to a very sharp cutting edge. the striking handle is 4 1/2 long and 1/2 wide .to give you a firm grip in your hand, all metal there is no rubber protective cover-but smooth finish the cutting edge is about 3 millimeters thick .this mason chisel give a clean cut when used on brick pavers .
Weston Morissette (verified owner) –
Chisel me “timbers”… Or I suppose “stones” is more appropriate. The Mayhew 2 1/4″ mason chisel is a solid tool and I know it will last. I’ve had this chisel’s 3″ older sister for years and it’s still solid. I mainly use it to shape/trim stone as well as remove aged mortar in our 100+ year-old field stone basement. When the blade/point gets dull or pitted, I simply use a file or Dremel tool to sharpen it…Then back to business. Solid steel construction and comes with a 2 year satisfaction warranty. Another great tool made-in-the-USA!
Eric Ferry (verified owner) –
As a “seeds” member when I was reviewing items available this one caught my eye, because of a long standing project I had been avoiding. I used this chisel to remove some mortar both off of bricks and remaining mortar where bricks came lose. Its size, durability and strength were perfect, and permitted me to complete the project timely. My only objection is the lack of some type of insulation e.g. plastic or rubber to minimize the vibration when hitting it with my 3lb. sledge hammer. So I recommend anyone using this item were insulated gloves.
Audie Runolfsson (verified owner) –
Did the job
Joelle Murray (verified owner) –
Chisel made shot work cutting up a bunch of small rock I had to shape for my garden.
Cedrick Daniel (verified owner) –
You need to have more people cross trained in other departments jas
Halie Aufderhar (verified owner) –
Really nice and convinient
Katherine Herman (verified owner) –
It is a chisel. I picked this up for other uses but it is doing the job. I have no complaints when it comes to this mason chisel. I have used it to chip concrete and bust up a little rock. it definitely does the job without any issue. Shipping was fast and the price was right. It is easy to use and the edge seems to be holding up pretty well. I would recommend
Elouise Ferry (verified owner) –
Very pleased with how it cut the existing brick on my home without chipping surrounding areas.
Seamus Kilback (verified owner) –
great