No products in the cart.
Whether youre updating cabinets or youre building a project from scratch, mounting drawers is always a challenge. The slides have to be level, straight, and positioned properly, or the drawers wont operate well. The drawer slide jig takes the guesswork out of the process by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, youll know that your slides are positioned correctly, so your drawers will operate smoothly. The drawer slide jig consists of 2-brackets that clamp in place inside the cabinetone on each cabinet sideandalignwith the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too. The drawer slide jig works with almost all types of drawer slides, including ball-bearing, epoxy-coated, andundermountslides. All you need are the slides youll use, a clamp, and the drawer slide jig, and youre set to install drawer slides just like the pros.
- Bore clean, perfect holes for concealed door hinges
- Works with all 35 mm concealed hinges
- Shank fits perfectly in concealed hinge jig drill guide
- Shoulder ensures accurate stop-collar positioning (stop collar sold separately with Concealed Hinge Jig)
- Spurs create clean hole edges without tear out
- Large carbide cutters bore a flat, smooth hole
- Stop collar not included with this bit, sold separately with the concealed hinge jig
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 0.22 lbs |
|---|---|
| Dimensions | 7.00 × 3.25 × 1.62 in |
| Assembled Depth (in.) | 1.375 in |
| Assembled Height (in.) | 3.5 in |
| Assembled Width (in.) | 1-3/8 in |
| Bit Diameter | 1-3/8 in |
| Bit Length (in.) | 1.375 |
| Bit Material | Carbide |
| Drill Bit Type | Forstner |
| Drill Bit Type(s) Included | Forstner |
| Individual/Set | Individual |
| Material Application | Wood |
| Model | KHI-BIT |
| Self-Feeding | No |
| Shank Diameter | 1/2 in |
| Shank Style | Straight |
| Tools Product Type | Power Tool |
9 reviews for Kreg 35mm Carbide Concealed Hinge Bit
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Bits
Model# DW2045 G
$5.15
Drill Bits
Model# 48-20-8852
Drill Bits
Model# DW2735P
Drill Bits
Milwaukee Selfeed High-Speed Steel Wood Boring Bit Set (7-Piece)
Model# 49-22-0130
Drill Bits
Model# DW2043 Z
Drill Bits
Model# 48-25-2252
Drill Bits
Model# DW2542
Drill Bits
Model# DW2162
Maudie Powlowski (verified owner) –
Worked very well
Lorenza VonRueden (verified owner) –
Read the instructions, did some bench tests for correct hinge placement and went to work without problems
Gordon Walter (verified owner) –
Cuts beautifully!
Xzavier Collier (verified owner) –
Smooth holes with sharp edges great bit!
Wendell Raynor (verified owner) –
typical Kreg quality!
Adelbert Prosacco (verified owner) –
If you’re using the kreg hinge jig which is killer then this is the bit you’re gonna need when the supplied fostner bit gets dull
Meta Watsica (verified owner) –
This is an exact replacement for the bit which came with my Kreg concealed hinge jig. It works perfectly.
Weston Homenick (verified owner) –
Awesome bit! Very sharp. Got a few holes carved out no problem.
Eusebio Glover (verified owner) –
Although not the best quality bit, it was adequate for what I needed and the price reflected that it would be an average quality bit. If you want a higher quality you should expect to pay more.