Easily remove slugs with this Bi-Metal Hole Saw Set. It has popular sizes for basic electrical work. The bits are heavy duty to bore through 2x4s in a single pass.
- Set contains the 3 most frequently used small hole saws sizes: 7/8 in., 1-1/8 in., and 1-3/8 in.
- Includes 6 hole saws: (2) model # 31914, (2) model # 31918, and (2) model # 31922
- Bore through wood 2x4s in a single pass
- Cuts precise holes in both mild and stainless steel, drywall, ceiling tile, laminates, wood and plastic
- Multiple leverage points for easy slug removal
- Note: Set pilot drill point 1/8 in. beyond tooth points
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Elenor Shields (verified owner) –
The Klein Tools Bi-Metal Hole Saw Set (6-Piece) are a nice set to have. These three sizes pretty much covers the sizes needed, to run any kind of wire that we typically install.They are slightly deeper than my Milwaukee hole saws so I have to adjust the pilot bit out a little to compensate for the longer length. But on some of our projects that little bit of extra length is a blessing.
Jordon Raynor (verified owner) –
These hole saw by Klein Tools are a top quality hole saw. I got clean cuts in both 2 x wooden studs and galvanized steel studding. Fortunately these hole saws fit industry standard quick connet dual pin mandrels. The Klein mandrel recommended is not easily aquired from suppliers in the desert. The hole saws easily thread from a quick connect mandrel. As with any metal cutting hole saw coating the mandrel threads with anti-sieze compound is a good idea due to the heat than can buildup with construction use. The holes cut with these saws in both types of studding give you clean cuts and well prepared holes for electrical or plumbing use.
Celestino Powlowski (verified owner) –
Great set of hole saws. They fit right into my drill and and had not problem drilling holes with them Great variety of sizes so you are ready to drill any type of holes. I do go very slow when using to keep any splintering of wood, so far so good. The bits seem well made and should hold up for a long period. this is a very inexpensive set for any do it yourselfer to complete your tools that you need. Already had a neighbor borrow one of the bits to do some drilling Nice.
Terrill Flatley (verified owner) –
Set of 6 bi-metal hole saws. 2 of 7/8″, 2 of 1 1/8″ and 2 of 1 3/8″. If you use these hole saws for craft projects or other small projects, I’d go with another set that gives you 6 different sizes. A carrying case is not supplied. Comes in 6 different packages. Also does not come with an arbor. Purchase Klein 31905 which will fit these 3 sizes. You can use arbor 31906 as a fancier arbor for the 1 3/8″ size. Gives you a clean 1 1/8″ hole and a clean 1″ plug. I use these hole saws for craft projects like toys or checker sets. Doesn’t drill has fast as the carbon tipped hole saws but the hole is cleaner. Make sure you clamp the work piece and plunge slowly.
Jazmyne Tillman (verified owner) –
These are real workhorse hole saws for running wires and some water supply lines. They are deep enough to make it through framing materials and will drill metal studs as well. I have hit stray nails in framing with these saws and they have cut through — although it does put a lot of torque on the drill. The saws are easy to clear with multiple holes in the sides for pushing the plug out.The range of sizes covers most routine electrical jobs and probably many plumbing jobs as well. This set includes just the hole saws themselves, so make sure you have a suitable arbor (or buy one) for mounting these saws and putting them to use.
Antonia Ruecker (verified owner) –
I purchased them at a great deal. They work great.
Katelin Zemlak (verified owner) –
Great deal
Ashtyn Bernhard (verified owner) –
great deal,the quick snap works great with it really heavy duty saw bits
Zachery Lueilwitz (verified owner) –
Great set of hole saws. They fit right into my drill and and had not problem drilling holes with them Great variety of sizes so you are ready to drill any type of holes. I do go very slow when using to keep any splintering of wood, so far so good. The bits seem well made and should hold up for a long period. this is a very inexpensive set for any do it yourselfer to complete your tools that you need. Already had a neighbor borrow one of the bits to do some drilling Nice.
Monte Barrows (verified owner) –
Read the description carefully. This is actually 2 sets of 3 hole saws (7/8″, 1 1/8″ 1 3/8″) for a total of 6 pieces. The set does not come with an arbor but they did fit my Milwaukee arbor so I had to buy nothing else. I haven’t used them enough to comment on durability. They look well made.
Michael Kulas (verified owner) –
Klein Tools have long been known for quality and the Bi-Metal Hole Saw Set is no exception. Luckily when I received these, I already had a set of arbors that fit the Klein Hole Cutters. My primary use was for cutting holes in metal R-Panel for air lines. They performed flawlessly and quickly. This set included only three sizes but it contains two of each of the popular sizes used in most plumbing and electrical applications (7/8, 1 1/8, 1 3/8). Just for evaluations purposes, I drilled each of the three sizes into a 2×4. I was impressed on how quickly they bore through wood. I used the 1 1/8 mostly on the R-Panel but after several uses, I did not see a decline in the sharpness of the cutter. While Klein products can be pricey, the quality they produce is well worth the costs.
Joel Yost (verified owner) –
Excellent product, more so for those who drill holes regularly and need a supply of specific blade / hole sizes. The bi-metal blade composition means wide range of usage, and long-term blade wear and tear.
Gail Connelly (verified owner) –
This got the job done that I wanted. Made the project each to complete and was very please.
Lucile Abshire (verified owner) –
Upon ordering these Bi-Metal Hole Saw Set of 6.I was not aware of the fact they needed additional pieces not included with this set. To my disappointment I went to Home Depot, my local area store and discovered they did not carry the items in-store but I would be able to order them online via Home Depot website which is what I did ordering Milwaukee 3/8 in. High-Speed Steel Hole Saw Arbor Shank and Milwaukee 1/4 in. High-Speed Steel Hole Saw Arbor Pilot Drill Bit and 3/8 in. Ergo Quick-Change Saw Arbor. An additional $41.00. This is what you need to operate the two different sizes in the kit plus I purchased the additional drill bit replacement for a spare if ever I need to replace of the others ones. The saws work great boring through 2X4’s and other wood I am working with on projects around my home. Not as equally effective cutting through pressure treated wood but did work to my surprise and I am happy with the results. This Hole saw set works much better then drilling and cutting by hand with a key hole saw. Or a recip saw. This item does make the job much easier and hopefully in the future I will see these items in the Home Depot store here in my area. Avoiding future shipping charges. No problem with the Saw Set would recommend it to anyone needing a quality bore tool. Just be aware it needs additional parts to operate. Sold separately on line at this time.
Mike Mueller (verified owner) –
These are the most popular sizes of Klein hole saws.. I don’t usually need hole saws, but I have some nice cedar planking, and wanted to use it for something special, like bird houses! So I’m hoping they turn out well, once I get those holes drilled. These make a very nice clean cut, so far as we can see, as nice as any hole saw could! I’ve had other Klein tools and have been very pleased with them! Hope the birds will be pleased with them too!
Merlin Hettinger (verified owner) –
Some pictures showed only the hole saws and some pictures in the product overview showed a set of hole saws with case and bit. What I received were individual hole saw packages with no case and no bit to use to attach them to the drill, so I will be returning them. Just be aware when purchasing.
Alford Connelly (verified owner) –
This is a great set if you are an electrician. It includes the three sizes you use most. I would not buy this as my first set, as it doesn’t include the 2 sizes of arbors you need. But if you already have the arbors, and need replacement hole saws, then this is a good set to get. They are quality set, and competitively priced. They have better pry-points then some other brands, making it easy to remove the slugs after drilling your hole.