Jet ProShop II 10 in table saw with 30 in. Rip and Cast Wings JPS-10

Jet ProShop II 10 in table saw with 30 in. Rip and Cast Wings JPS-10

Name: Jet 725002K ProShop II 10 in table saw with 30 in. Rip and Cast Wings JPS-10
Brand: Jet
SKU: HD305310688
Availability: InStock

$1,549.99

Offer numerous high-end features, such as an arbor lock and quick-release riving knife with Jet ProShop II table saw with 30 in. Rip and Cast Wings JPS-10.

In stock

SKU: HD305310688 Category: Saws Brand: Jet

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves and the quick release riving knife reduces chance of kickback. The exclusive ProShop fence system is available in 30 or 52 rip capacity.

Newly designed arbor lock to change blades quickly and easily
Quick release riving knife for hassle free riving knife changes
Improved dust shroud around blade for greater dust collection
Convenient, magnetic paddle switch for the safest operation possible
Innovative single belt design for easier belt tensioning and reduced vibration
Motor reset switch conveniently relocated to the power switch, instead of the motor
Redesigned guard for better protection and ease of use
On board storage for all included accessories
CSA certified

Weight	301.6 lbs
Dimensions	60.00 × 40.00 × 43.00 in
Amperage (amps)	20
Maximum Cut Depth @ 90 Deg.	2.125
Tools Product Type	Power Tool
Table Width (in.)	27
Table Tilt Right Max (degrees)	0
Table Tilt Left Max (degrees)	45
Table Length (in.)	20
Rip Capacity - Right	30
Rip Capacity - Left	13-1/2
Power Tool Features	Blade Guard System, Stand Included
Portability	Stationary
PT Horsepower (Hp)	1-3/4
Model	725002K
Maximum Speed (rpm)	4000
Maximum Cut Depth @ 45 Deg.	2-1/8
Bench & Stationary Tool Type	Table Saw
Included Accessories	Stand
Horsepower (hp)	1.75
Dust Collection Method	4 in. Dust Port
Depth Control	Yes
Cuts Through	Wood
Cordless/ Corded	Corded
Cord Length (ft.)	6
Construction Material	Cast Iron
Condition	New
Color Family	White
Blade Speed	4000
Blade Location	Centered
Blade Diameter (in.)	5/8
Work Table Surface	20 in. x 27 in.

1 review for Jet ProShop II 10 in table saw with 30 in. Rip and Cast Wings JPS-10

Rated 5 out of 5

Alyce Ritchie (verified owner) – June 19, 2021

I’ve had this saw for three years now and know a bit about it. Having said that, I wish I’d bought at least a 3HP saw and Jet has some good looking ones. That is not the saw’s fault but mine. For a contractor saw in this class, I think this is a great little saw. If you take your time on set up, which I’ve done more than once, it will cut accurately. Its not a cabinet saw, but is probably in the running for best in class. Set up properly it will cut well. If you take the advise of many reviews that I have read, they always say the blade is not good and should be replaced. I took that advise and bought several expensive blades, none of which cut as well on this saw as the supplied blade. Its not a full kerf blade, but its not as narrow as the thin kerf blades on the market. Maybe its metric. But the saw will bog down cutting with a full kerf in maple and wanders with a thin kerf in the same. The supplied blade is a goldilocks compromise and its actual produces good results. Also, thin kerf blades are below the minimum width to allow use of the riving knife so you can’t use the blade guard feature. The blade guard is excellent by the way and I use it whenever I can.If this is the market you’re in due to price I don’t think you can go wrong. The dust collection does not work well — nothing in this range does. But it will spin a small dado sets with extrodinary results. I put Incra rails and fence on mine and it works very well (don’t think this is necessary), but I fear that most of what I was trying to correct was due to not using the suppplied blade. Use that blade and this thing will do the job for you. Great little saw and at a fair price.