No products in the cart.
Jet 3/4 HP 15 in. Benchtop Drill Press with LED worklight, 16-Speed, 115-Volt, JDP-15B
$799.99
Get your professional drilling job done with comfort and ease by choosing Jet Benchtop Drill Press with LED worklight, 16-Speed, JDP-15B. Offers durability.
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
The new Jet JDP-15B, 15 in. Benchtop Drill Press replaces the Jet JDP-15M/354165. From a full 3-1/8 in. of spindle travel to the sturdy cast iron head with a poly v-belt drive system, this drill press is designed to perform. This drill press also features a 1-handed belt-tensioning system and a large 12-1/2 in. x 17 in. work table.
- Large 12-1/2 in. x 17 in. precision ground work table features twin T-slot grooves and 4 table slots to accommodate any project
- Power switch features a safety key and large, paddle-style off button
- Integrated depth stop makes repetitive drilling quick and easy
- Xacta-X laser system easily identifies the drill center
- Long-lasting, built-in LED work light reduces shadows
- Table edge lip designed to make clamping easy
- Replaceable MDF table insert
- Large cast iron base provides stability
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 154 lbs |
|---|---|
| Dimensions | 37.00 × 33.50 × 13.00 in |
| 360- Degree Swivel | No |
| Maximum Speed (rpm) | 3500 |
| Voltage (volts) | 115 |
| Tools Product Type | Power Tool |
| Spindle Travel | 3.125 in |
| Portability | Bench |
| Number of Speeds | 16 |
| Model | 716200 |
| Minimum speed (rpm) | 210 |
| Magnetic | No |
| Amperage (amps) | 9 A |
| Lockout Power Switch | No |
| Cord Length (ft.) | 6 |
| Condition | New |
| Color Family | White |
| Chuck Key Storage | No |
| Chuck Capacity | 5/8 In. |
| Built-In Light | Yes |
| Bench & Stationary Tool Type | Drill Press |
| Work Light | Yes |
13 reviews for Jet 3/4 HP 15 in. Benchtop Drill Press with LED worklight, 16-Speed, 115-Volt, JDP-15B
Only logged in customers who have purchased this product may leave a review.
Related products
Woodworking Tools
Model# DW735
Woodworking Tools
Model# 557
Woodworking Tools
Milwaukee 13 Amp Corded 2-1/4 in. Max HP EVS BodyGrip Router
Model# 5616-20
Woodworking Tools
Model# 7518
Woodworking Tools
Model# 3365
Woodworking Tools
Model# R24012
Woodworking Tools
Model# 7519
Woodworking Tools
Model# 892
Kris Hills (verified owner) –
Drill press went together well only missing one of the set screws for the base, a call to Jet quickly resolved the issue. Pros: Home Depot had the best price period. Was purchased around black friday. Local stores and online stores hundreds more.Led work light.Replaceable insert in table.Laser X.Quiet.Customer support.Cons:Missing set screw delayed use until replacement arrived.
Milford Luettgen (verified owner) –
Took a while to get it together and set it up, just procrastination, but it worked out of the box. It took care of issues that I was facing with ease and seems very intuitive. Can’t wait to complete more projects with this item.
Kamryn Johns (verified owner) –
I am happy with this drill press. It replaced a Delta 12 inch bench model purchased in the 90’s. It arrived at the Home Depot store within 2 days of placing the order. Store employees helped me load it. Shipping weight was 168 lbs. It is solid and well built. Speed changes are easy. The laser was pretty close and a little fine tuning was all that was needed. It is accomplished with a pair of pliers. Instructions in the manual. Same for leveling the the center plate in the table. The most difficult part of assembly is putting the head on the column. It is heavy and will require assistance. The head probably weighs about 120 lbs. I mounted the the base and column to the cabinet I built and had a couple of guys lift the head while I helped guide them over the column. This was my first large tool purchase via Home Depot. The experience was very good and I will consider using them again. I ordered online and picked up at the store. Home delivery was an option, but store pickup was better for this heavy item. I won’t hesitate to special order online for store pickup again. Already thinking about upgrading my lathe to a Jet.
Ansel Dooley (verified owner) –
I’ve used it several times since receiving it a couple of months ago.It’s a sturdy beast and performs very well. I didn’t initially understand how to assemble the rack into the table lift gear and had to watch a video. I didn’t think I needed 2 people as recommended – turns out they were right.I love the big cast iron table. I mounted it on a Dewalt planer mobile stand which is sturdy and works well, but may be a bit too high for some.It’s worth the effort to get everything aligned really well.
Kaya Smith (verified owner) –
An excellent product. Smooth in operations and quiet. Handles well and get all tasks done quickly and efficiently.
Abelardo Fay (verified owner) –
Very heavy well made drill press. Very quiet and less than .001 thousands run out on the Chuck.
Ruben Murphy (verified owner) –
I am happy with this drill press. It replaced a Delta 12 inch bench model purchased in the 90’s. It arrived at the Home Depot store within 2 days of placing the order. Store employees helped me load it. Shipping weight was 168 lbs. It is solid and well built. Speed changes are easy. The laser was pretty close and a little fine tuning was all that was needed. It is accomplished with a pair of pliers. Instructions in the manual. Same for leveling the the center plate in the table. The most difficult part of assembly is putting the head on the column. It is heavy and will require assistance. The head probably weighs about 120 lbs. I mounted the the base and column to the cabinet I built and had a couple of guys lift the head while I helped guide them over the column. This was my first large tool purchase via Home Depot. The experience was very good and I will consider using them again. I ordered online and picked up at the store. Home delivery was an option, but store pickup was better for this heavy item. I won’t hesitate to special order online for store pickup again. Already thinking about upgrading my lathe to a Jet.
Corene Zieme (verified owner) –
Well built drill press, packaged well no damage during shipment. Heavy machine, no adjustments needed started drilling right out of the box. Reccomend buying this one. led light and laser are great features.
Amalia Price (verified owner) –
Overall I really like this drill press, but there was one thing I am unhappy about. There was significant wobble in the chuck, so I removed the arbor and chuck for inspection. The arbor appeared to be poorly machined, so I ordered a new one from McMaster-Carr, and with the new arbor the wobble was reduced by about half. I suspect the remaining wobble is in the chuck, or possibly the quill. At some point I may upgrade the chuck and see if that improves things. I am dissapointed in Jet’s quality control. For the price of this drill, substandard machining is not acceptable.
Estell Hagenes (verified owner) –
This drill press delivers on all expectations. It took two people to lift it onto the bench, but that’s a good thing. My only add-ons have been a wood tabletop and a Rockler fence.
Floy Stroman (verified owner) –
Great drill press. I had it shipped to my local HD, which made for a really easy pickup. The table is large and it is easy to add a fence, with the built in T slots. Press is very smooth, a nickel balanced on the table on its edge will not move during startup/shutdown.
Delmer Renner (verified owner) –
Unit is somewhat noisy, changing speeds by moving belts is old school. The depth adjustment is a little cumbersome to set compared to most other drill presses I have used. It is not a bad unit and I’m OK with it. Quality of build is good, nice sturdy drill press.
Titus Powlowski (verified owner) –
Being a machinist I have used a lot of different and very high priced equipment, this ranks right up there with them.For a home owners drill press it is a bit of overkill, but regardless this is an extremely well built machine.I love the dual short flat belts and single roller bearing tensioner, (it’s about time someone smarted up and made that).V-belts are for no one, flat/grooved belts are the latest technology and why equipment companies are still using V-belts is beyond me.They rob Horsepower, vibrate and make a lot of noise.The table is large, rotating it isn’t easy, (my only con) I love the replaceable insert in the center of the table (another it’s about time).The unit is extremely heavy due to the fine quality of the machine.I could go on about every detail, but if you are looking for your first or last drill press that you will ever have to purchase then this is the one.The first thing I used mine for was drilling thirty 2.25 holes with a forstner bit, no problem.I am looking forward to finishing my shop so I can set this up for everyday use.