No products in the cart.
General Tools Professional Crown Moulding Cutting Jig Tool for miter radial and table saws
$22.65
Crown Moulding Cutting Jig designed by General Tools is intended for adding decorative elements to cabinetry or enhancing door and window hoods.
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
Since 1910, General Tools has grown to become the recognized industry leader for specialty hand tools and instruments. Carpenters, builders, interior decorators and DIYers know that crown molding lends artistic flair to ceilings and walls. Whether dressing-up ceilings, adding decorative elements to cabinetry or enhancing door and window hoods, Generals Crown King jig enables cutting precise joining angles every time. Its distinct design eliminates confusing upside-down miter box positioning and compound angle cutting, enabling fast and easy production of interior and exterior corner joints. With its 38/52 Degree insert, the Crown King enables cutting the three most common crown molding spring angles.
- Removes annoying trial and error and streamlines the creation of crown molding since crown stock is orientated in the crown king jig the same way it is installed so it’s easier to visualize and plan cuts, no flipping stock or inverting angles
- Crown king jig eliminates the need for confusing upside-down miter box positioning, compound-angle cutting, complicated compound miter angle calculations, coping of joints, back-cuts and auxiliary fences
- Features adaptor for 52° and 38° spring angle crown stock or remove adapter to cut 45° spring angle crown
- Create perfectly fitting interior and exterior crown moulding joints
- End-user needs only to rotate the saw blade to the angle corresponding to the corner of the walls
- 4-simple steps: (1) measure the interior (INT) and exterior (EXT) corners using the included angle finder/protractor, (2) set the saw blade direction as indicated on the top of the jig, then set the blade at 1/2 of the measured angle, (3) hold moldings securely in the jig and make the cut using an electric or hand miter saw, (4) test fit and then install crown molding
- Includes handy angle finder/protractor
- Suitable for electrical miter saws, radial and table saws and adjustable manual miter saws
- 1-year limited warranty
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 0.65 lbs |
|---|---|
| Dimensions | 3.40 × 14.75 × 3.80 in |
| Individual/Set | Set |
| Jig type | Miter |
| Material | Fibre Reinforced Polymer (FRP) |
| Maximum stock size (in.) | 12 |
| Minimum stock size (in.) | 0.25 |
| Model | 881 |
| Number of Pieces | 2 |
| Power Tool Accessory Type | Jig |
| Product Length (in.) | 12 |
| Tools Product Type | Power Tool |
86 reviews for General Tools Professional Crown Moulding Cutting Jig Tool for miter radial and table saws
Only logged in customers who have purchased this product may leave a review.
Related products
Cutting Tools
Model# A13L
Cutting Tools
Model# K4H
Cutting Tools
Model# 2100-8
Cutting Tools
Model# 4212
Cutting Tools
Model# M123R
Cutting Tools
Model# 8501H
Cutting Tools
Model# 2100-5
Cutting Tools
Model# M5RL
Horacio Mayert (verified owner) –
One day, I decided to renovate my bathroom with new paint and moldings. I have found out that crown moldings are extremely difficult to install because it doesn’t just attach flat to the walls like the floor moldings. It took me an entire day watching youtube videos before I even attempted the first cut. After the confusion of interior & exterior, right & left cuts I finally started to understand the geometry & physics of installing crown moldings. The Jig was not easy to use for someone with absolutely no knowledge about crown moldings but after about 3 hours of practicing on scrap wood anyone can do this. I give this Jig a thumbs up because without it I would of quit for sure. I don’t know what kind of review I can give for this Jig because it’s the first one I ever tried but I like it and I have no need to try another type.
Ferne Morar (verified owner) –
The jig worked great. It made the job much simpler.
Amara Pollich (verified owner) –
This was my husband and son’s first attempt at crown molding. This jig made the job a lot easier! It looks fabulous! Love!
Fanny Carter (verified owner) –
Makes cutting moulding very easy. You don’t have to work upside down and backwards. Works with all the angles just by placing the yellow piece in the correct position. Great product and wonderful directions.
Madge Beahan (verified owner) –
Jig was really easy to use and does what it says it does. The only negative thing, is that it keeps the molding up off the saw (basically floating) so when cutting, you need to be careful or it will shoot chucks across the room. An 80 tooth blade and making sure your steady will Basically eliminate that though.
Brandy Fritsch (verified owner) –
This jig is awesome. I started kitchen project and could not figure out crown to save my life. I bought the Kreg and still no luck with many feet of crown going to waste. I bought the General Tools jig, watched a video and then did the job. AWESOME!
Johanna Rosenbaum (verified owner) –
Very straight forward to use
Hermina McClure (verified owner) –
Jig is a very helpful tool that makes cutting crown moldings easier, Directions included and on manufactures site are easy to understand. Cost is a good value.
Osbaldo Wyman (verified owner) –
Tool is all plastic but works great. It made cutting crown much easier.
Keagan Witting (verified owner) –
This jig really takes a lot of the guess work out crown moldings! With just a few cuts i was able to make the angles i wanted! I highly recommend this tool for DIY and for less then $20 you can’t go wrong!
Pierce Eichmann (verified owner) –
Very easy to use. Versatile for different size and degrees of crown molding styles. Great directions to help you figure angled cuts.
Roy Wiza (verified owner) –
It did everything they said it would and at a very affordable price. It was key to me having a successful crown molding project.
Ruthie Schoen (verified owner) –
This was the first time I did crown moulding. The gadget worked great and the job came out perfect. Well worth the money!
Isadore Jacobs (verified owner) –
Good instructions, easy to use
Maude Harber (verified owner) –
Very easy to use. The angle gages are very useful and self explainable. However, it could be made in a stiffer material. The plastic used to made it is not so rigid and sometimes is difficult to keep the molding and the cutting jig aligned with the mitter saw table.
Glenna Nolan (verified owner) –
I just finished installing two-part molding – bottom piece is flat against wall and the second (top) piece is 52 degree crown. This jig made it a snap. (I struggled through doing the same job without the jig using with same molding in another room – much, much more difficult. Best money I spent on this or any other recent project.
Dalton Herzog (verified owner) –
Works great just as advertised.No guessing on angle degrees
Max Rogahn (verified owner) –
My first time doing crown and this jig made the world of a difference. I would advise anybody doing crown for the first time or even professionals to use this jig. A
Albin Jacobson (verified owner) –
Easy to use, just as described
Kris Erdman (verified owner) –
I don’t have a lot of experience working with crown moulding and wasted a lot of material trying to figure out the angles. This tool fixed that, making the angles easy and providing a quick reference so you don’t accidentally cut the wrong way. It also sped up the project timeline, another added bonus. I highly recommend it for the average DIYer.