No products in the cart.
The DEWALT 12 in. Heavy Duty Traditional Bar Clamp is built tough with the ability to clamp up to 1,000 lbs. of force. It includes a 3-piece clutch lock system for strong, sturdy locking. It’s quad lobe handle is tailored for better grip, performance and torque.
- 1000 lbs. of clamping force
- 3-piece clutch lock for strong, sturdy locking
- 3-1/4 in. throat depth
- Ergonomic handle
- 12 in. bar clamp
- Limited lifetime warranty
- Genuine DEWALT tool
| Weight | 3.22 lbs |
|---|---|
| Dimensions | 1.45 × 5.55 × 16.45 in |
| Clamp Type | Bar |
| Clamping Strength (lb.) | 1000 |
| Duty Rating | Standard |
| Hand Tool Type | Clamp |
| Individual/Set | Individual |
| Jaw Width | 3.25 |
| Material | Multi-Surface |
| Maximum Opening (in.) | 12 |
| Model | DWHT83265 |
| Throat Depth | 3.25 |
| Tools Product Type | Hand Tool |
29 reviews for DEWALT 12 in. 1000 lb. Bar Clamp w/3.25 in. Throat Depth
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Model# TR110
Fastening Tools
Model# 63302
Fastening Tools
Model# TT21
Fastening Tools
DEWALT 6 in. 100 lbs. Trigger Clamp with 2.43 in. Throat Depth
Model# DWHT83139
Fastening Tools
Model# DWHTHT450
Fastening Tools
Model# 28608
Fastening Tools
DEWALT 12 in. 100 lbs. Trigger Clamp with 2.43 in. Throat Depth
Model# DWHT83140
Fastening Tools
Model# DWS5026
Paige Veum (verified owner) –
Nice strong clamp, handle is fairly ergonomic,works as expected. Could benefit from a 3/8 square socket at the end of the handle so you could use a socket extension to reach it in tight spots, but that would be any bar clamp.
Rose McLaughlin (verified owner) –
This clamp has a nice grip to the handle/knob, but when cranked down, it would almost always come out of the rubber boot. This would make it necessary to reset the clamp. I just took all the boots off, and only consider using them when I feel it necessary.
Sim Moore (verified owner) –
Great Clamping Strength – excellent handle for gripping, better than Bessey. Moving jaw does not slip. About half of screws were not parallel to bar causing slight misalignment of clamp faces.
Shaniya Gibson (verified owner) –
The plastic protective sleeve on the fixed end falls off every time I use it. I finally glued it on with some Lexel. If it hadn’t been for this little issue I would have given it a 5 star rating. I will purchase another one.
Cornell Goldner (verified owner) –
This thing is a brick: super sturdy and very heavyweight.
Giovanna Hilpert (verified owner) –
Easy to use, Works well
Waino Abernathy (verified owner) –
I was working on a project when this DeWalt 12″ heavy duty clamp arrived and my wife brought it into my workshop. It was used to clamp 3/8″ sheeting to a frame. Normally I use a smaller clamp, but I was excited to try out my new clamp! lol … This is a heavy duty clamp with a 3 1/4″ throught.It has a clamping force of 1,000 lbs. and is very user friendly. The pads on the clamp head are 1 1/4″ x 1 1/2″ and the spindle is padded so the wood is protected. The handle is large and fits the hand well,and easy to grip. The slide of the clamp is heavy and does not flex when put under pressure. This is one of the very best clamps I have used and would highly recommend this to home owners or contractors.
Stuart Crona (verified owner) –
if I could give this clamp a 10 I would,,,just make sure you get the heavy duty one
Rylee Veum (verified owner) –
These clamps work very well with my portable work site table to hold products in place. Best of all they were on clearance at my Home Depot location.