No products in the cart.
This powerful breaker bar functions as an extension bar that securely holds socket wrench style sockets with extra leverage to break loose frozen and stuck nuts and bolts. Extended 30 in. L, 25% longer than standard, give you extra leverage and makes your job easier. The Chrome Vanadium body is paired with a Chrome Molybdenum head, making for an extremely strong and durable breaker bar. The sockets are kept firmly secure by the spring loaded ball bearing. The head rotates 230-degrees to provide you with dynamic options for a variety of jobs.
- Get the extra leverage you need to break loose frozen and stuck nuts and bolts
- Extended 30 in. L, 25% longer than standard, gives you extra leverage and makes your job easier
- 1/2 in. drive with 30 in. of extended length
- Chrome vanadium body
- Chrome Molybdenum head for extra-strength
- Spring loaded ball bearing ensures sockets are securely held
- Rotates 230-degrees for dynamic utilization in a variety of jobs
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 1.6 lbs |
|---|---|
| Dimensions | 30.00 × 2.00 × 2.00 in |
| Color Family | Steel |
| Drive Size | 1/2 in |
| Features | No Additional Features |
| Hand Tool Type | Ratchet |
| Handle Length (in.) | 30 |
| Individual/Set | Individual |
| Material | Steel |
| Model | CP40123 |
| Number of Pieces | 1 |
| Tools Product Type | Hand Tool |
| Tooth Count | 0 |
13 reviews for Capri Tools 1/2 in. Drive 30 in. Extended Leverage Breaker Bar
Only logged in customers who have purchased this product may leave a review.
Related products
Ratchets & Sockets
Model# 80546
Ratchets & Sockets
GEARWRENCH 3/8 in. Drive SAE 6-Point Standard Socket Set (13-Piece)
Model# 80553
Ratchets & Sockets
GEARWRENCH 1/2 in. Drive 6-Point Standard Socket Set (11-Piece)
Model# 80703
Ratchets & Sockets
Model# 80323
Ratchets & Sockets
GEARWRENCH 3/8 in. Drive Metric 12-Point Standard Socket Set (14-Piece)
Model# 80560
$47.90
Ratchets & Sockets
GEARWRENCH 3/8 in. Drive Metric Ball Hex Bit Socket Set (8-Piece)
Model# 80573
Ratchets & Sockets
GEARWRENCH 3/8 in. Drive Metric 6-Point Deep Socket Set (14-Piece)
Model# 80554
$42.48
Ratchets & Sockets
Model# 80577
$29.93
Palma VonRueden (verified owner) –
I was impressed with the fit and finish. Very nice tool for this price.
Devonte Becker (verified owner) –
I had gotten a flat tire tire on my truck and had tried to use the tools that came with the truck to change the flat tire. Since the lug nuts are put on with air tools it was impossible for me to loosen the lug nuts. Had to have AAA come assist. The AAA driver recommended I keep a breaker bar in the truck for future flat tire removal. That is why I choose this breaker bar to keep in my truck.
Urban McGlynn (verified owner) –
Very satisfied with the quality of the Capri 30” breaker bar for the price. Performed flawlessly for the purpose it was acquired. Recommend it and would purchase again
Clementina Maggio (verified owner) –
This is a finely crafted tool that turned out to be inappropriate for its intended task. My project was to change out a sacrificial anode rod inside my hot water heater. It’s a project that can potentially extend the life of water heater by at least 100%, so long as you perform the task every few years. What I couldn’t have known is the amount of installation torque used by manufacturers as they assemble each new water heater. I’ve seen Youtube clips where a breaker bar can apply enough torque to loosen the anode rod enough to extract it and install a new one. But the homeowner must find a way to restrain the water heater from rotating, even though it’s weighted down by hundreds of pounds of water. Mine wanted to rotate like a dervish and wreck its plumbing connections in the process. So, I can’t blame the breaker bar for my initial failure. Instead I purchased a battery-powered impact wrench similar to those seen at tire shops. It has the amazing ability to apply massive torque (in either direction) to the fastener directly, without causing the entire water heater to rotate. Live and learn folks, but if you’re on the market for a beefy breaker bar, this one fits the bill. It’s beautifully made, and I’m sure I’ll use it again, perhaps to loosen tire lug nuts whenever there’s a flat tire in my future. I’ll find a spot for it in the trunk of my car.
Torrance Leuschke (verified owner) –
This is a very nice breaker bar that is super handy. It is made from heavy duty chrome vanadium steel, and has a 1/2 inch drive head swivels that 180 degrees. It measures about 30 inches and provides loads of leverage for high torque applications. This will be super handy for removing the nut that holds the harmonic balancer on a vehicle crankshaft. They are usually pretty tight. A must for all backyard mechanics!
Ernie Leuschke (verified owner) –
Perfect breaker bar
Titus Beatty (verified owner) –
Good breakover bar… Not much else to say. I do wish the handle had a hole in the end to allow the hanging of this on my wall.
Ulices Bailey (verified owner) –
Every mechanic needs one of these breaker bars for their tool set. I have lost count the number of times I have used a pipe on a ratchet handle for leverage and wished I had a breaker bar. I got this one because it is a 1/2″ drive and 30″ long. It gives a lot of leverage for those hard to remove bolts and nuts. You may only use it once or twice a year but you will be glad you have it when you do. It is tough and durable for a lifetime of use.
Ansley Huel (verified owner) –
I was having trouble breaking some frozen bolts loose and with the extra tork I got from using this 1/2 inch breaker bar they came loose right away.
Harvey Rosenbaum (verified owner) –
Very satisfied with the quality of the Capri 30” breaker bar for the price. Performed flawlessly for the purpose it was acquired. Recommend it and would purchase again
Cheyanne Bayer (verified owner) –
Not a whole lot to say about this except that it works like you’d expect it to. Thirty inches gives you a lot of leverage, so there isn’t too much you can’t break loose with this. Add a cheater bar (which, to be fair, it does specifically say not to), and you’d be unstoppable. If you’ve ever found yourself in a position having to deal with overly-tight fasteners, this is a good addition to your tool box.
Ena Baumbach (verified owner) –
Excellent tool needed it soon as I got it
Kayley Daugherty (verified owner) –
The product is very well built. But I don’t think you need to spend this much.The fit and finish are excellent. The 5/8″ diameter shaft, along with the drive head, should be able to handle 300 ft-lbs easily. The AO-finished drive head has a spring detent which moves smoothly. The drive head is secured to the arm with a hex head pass-thru bolt … so maybe it’s replaceable [1/2″ x 1 3/16″ tang]. The grip is very comfortable [not knurled] … it could/should be another 1/8″-to-1/4″ larger in diameter?If price weren’t a factor, I’d have given it five stars.