No products in the cart.
Bosch 1/2 in. 3-Jaw Keyless Chuck with SDS-Plus Shank
$41.96
Make bit changes on the fly to your SDS-Plus rotary hammer drill with this 1/2 in. Keyless Chuck from Bosch. Suitable for use only in rotary mode, this handy device will hasten your productivity with a twist-lock mechanism that securely holds bits while operating your machine and instantly releases them when it’s time to switch.
Free U.S. Standard Shipping
30-Day Money Back
100% Secure Payments
Top-notch support
In stock
Make bit changes on the fly to your SDS-Plus rotary hammer drill with this 1/2 in. Keyless Chuck from Bosch. Suitable for use only in rotary mode, this handy device will hasten your productivity with a twist-lock mechanism that securely holds bits while operating your machine and instantly releases them when it’s time to switch.
- For use with SDS-Plus rotary hammer drills
- Compatible with straight shank drill bits
- Allows bit changes without a chuck key to maximize productivity on a job site
- Can be used in the drill-only mode
| Weight | 0.82 lbs |
|---|---|
| Dimensions | 8.00 × 4.25 × 2.00 in |
| Color Family | Blue |
| Drill Attachment Product Type | Adaptor |
| Material | Stainless Steel |
| Model | HA3JAW |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 1 in |
| Shank Style | SDS Plus |
| Tools Product Type | Power Tool |
60 reviews for Bosch 1/2 in. 3-Jaw Keyless Chuck with SDS-Plus Shank
Only logged in customers who have purchased this product may leave a review.
Related products
Drill Attachments
Model# 194633-2
Drill Attachments
Jacobs Professional Grade 3/8 in. Keyless Drill Chuck with 3/8 in. 24-Mount
Model# 30354
Drill Attachments
Model# HS1401
$17.99
Drill Attachments
Model# 73630
$76.88
Drill Attachments
General Tools Drill Bit Sharpener & Grinding Tool Attachment
Model# 825
Drill Attachments
Model# 203086
Drill Attachments
Model# 2012703
Drill Attachments
eazypower 11 in. x 1/4 in. Hex Consumer Flex A Bit (1-Pack )
Model# 73609
Lavada Kilback (verified owner) –
Excellent addition for an excellent drill. The chuck is easy to use, well made, and rugged. Just pop it in the SDS-Plus jaw of the drill and you’re ready to go. Just make sure you select “drill only” on your hammer drill when you use this chuck. Bosch has quality that shows. I haven’t experienced any loosening of bits in the 1/2 in. jaw that others have mentioned, but I have a habit of tightening a key-less chuck every so often when I work with this type of tool. I have no complaints. The 1/2 in. chuck is worth the money.
Florian Bashirian (verified owner) –
Works great. Now I can use standard masonry bits in my SDS hammer drill.
Efren Gottlieb (verified owner) –
I am able to use my rotary hammer for more things than just concrete drilling. I am able to use the torque of my Bosch Bulldog to run big hole saws and spade bits. You can NOT use the hammer function while using this attachment. That is the only downside. I bought this attachment for that reason at the time. It wasn’t until I got it home did I read the directions and realized that. I needed to use a 1/8th inch masonry drill bit and I can’t find a SDS one. The smallest they go is 5/32. I had to buy a smaller hammer drill with a normal chuck to complete my project. I would think the chucks in the hammer drills and this attachment should be about the same but I guess not.
Turner Jones (verified owner) –
This adapter locks into the Bosch SDS chuck and enables you to use your non-SDS bits and accessories. I was using my Bosch Bulldog hammer drill in the drill mode with a 3-inch hole saw to cut 16 3-inch holes through two thicknesses of 2X lumber to install vents. After cutting 12 of the 16 3-inch holes, this adapter quit working, The 3-inch hole saw was installed, the adapter would not loosen or tighten for me to change bits. In fact, the hole saw arbor is still locked into the adapter . . . don’t know how to get it out.May have been that I put too much torque or something on it — it was a tough job.Except for that incident, I am, 100% pleased. Am ordering another one plus a spare.Meanwhile, I know the Bosch Bulldog uses the SDS system. I wish Bosch or someone made the following with SDS shanks:– Wood boring bits up to 1-inch diameter– Hole saw arbor– Regular high speed drill bits
Ernestina Considine (verified owner) –
I read unfavorable reviews on this product but wanted to see for myself. I could not find any other solutions to convert my sds chuck to a keyless chuck that would except my 1″ x 14″ drill bit. I have had zero failures and given that I am drilling a tree stump 12″ deep with over 50 1″ holes I am happy with the product and would recomend it. I have really tested its limits and it performed to my expectations.
Carlos Schoen (verified owner) –
Good, solid chuck.
Verona Champlin (verified owner) –
Not for heavy duty work.
Murphy Lind (verified owner) –
Must have for impact. Use it on my Milwaukee.
Marcella Mante (verified owner) –
Fit like a glove and easy to use
Gwendolyn Bartoletti (verified owner) –
works great
Dewayne Orn (verified owner) –
Perfect to use regular drill bits
Palma Durgan (verified owner) –
The chuck arrived quickly and was exactly what I ordered. Thanks!
Fredy Kassulke (verified owner) –
Bosch can always be counted on to provide tools I can count on to be a superior product
Glenda Pfeffer (verified owner) –
This keyless chuck performed well a perfect fit for my drill and was priced reasonable.
Allan Johnston (verified owner) –
Allows me to use my existing masonry drill bits.
Freeman Stoltenberg (verified owner) –
Heavy duty. Can use my old bits with my new SDS Plus hammer drill.
Emmanuel Rau (verified owner) –
Use the chuck with my Bosch BullDog in digging holes for sprinklers. Works like a charm.
Ruben Frami (verified owner) –
Is excellent to work
Cleo Jaskolski (verified owner) –
Top!
Cary Jast (verified owner) –
Easy to use, feels well built and sturdy. Makes my sds plus rotary drill more versatile by accepting standard bits