No products in the cart.
The non-chip strip makes it easy to eliminate tear-out. Simply press this self-adhesive strip onto the clamp edge and cut. The excess width of the strip will come off so the edge of the non-chip strip sits flat against your blade parallel to your clamp edge.
- Self-adhesive non-chip strip ensures smooth cut with reduced tear-out
- Adheres to bottom side of BORA clamp edge for a clean cut
- Part of the BORA clamp edge system to cut and rip sheets and boards
- Sits flat against blade after initial cut to provide clear cut line of visibility
| Weight | 0.02 lbs |
|---|---|
| Dimensions | 55.00 × 0.87 × 0.06 in |
| Color Family | White |
| Ideally Used With | Circular Saws |
| Material | Plastic |
| Model | 544003 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 55 in |
| Tools Product Type | Other |
86 reviews for BORA NGX 55 in. Non-Chip Strip Replacement
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Accessories
Model# KMS7801
Saw Accessories
Model# 365595
$244.24
Saw Accessories
Olson Saw Contains 3 dry lubricants that will not make your band saw blade oily
Model# CB50000BL
$11.81
Saw Accessories
Model# 60098
$48.25
Saw Accessories
Model# KMS7213
$25.20
Saw Accessories
Model# 36-260
Saw Accessories
Model# KMS7200
Saw Accessories
POWERTEC Miter Saw Stand Mounting Bracket Assembly (Set of 2)
Model# MT4000MBA
Wava VonRueden (verified owner) –
Awesome. I can now cut straight with my circular saw.
Marta Haley (verified owner) –
Excellent guide and easy to use. When the two parts are assembled, they formed a straight edge that was verified with a level. Highly recommended.
Ervin Streich (verified owner) –
Sometimes the cut you want to make is difficult if not impossible on a table saw, especially if you are working alone. With this I can rip a full sheet into workable sections safely and comfortably on sawhorses. Plus if you are like me and can’t cut a straight line to save your life with a circular saw this will do that over and over with minimal effort. The quick clamp system is fast and easy to use on 90 degree cuts and you and attach the tracks with clamps at any angle if you need. Once you set the sled to know the offset of the blade the marks on the sled let you know if you are on your line and ready to cut. It breaks down into a small package and takes little room to store. I would say it is a good alternative to a table saw especially if storage space is at a premium.
Bill Muller (verified owner) –
I really could have used this when I was building 4 barn doors for my basement. But I have two more to go and this will make the job much easier. It’s a pretty simple setup – the bars clamp easily to the work piece. And if it’s just straight cuts you can get away without the sled, just keep your saw pressed up against the track. The sled is a little tricky to attach straight but that’s more due to me being new to using a track saw. Couple of YouTube videos later and it was easy to figure out. And using the sled will ensure the saw doesn’t stray. All parts are very sturdy, very little flex in the bars. And the additional track clamps are a great addition – you can use bar clamps or C clamps, but to have clamps purpose built for this is much better. All in all, this is hands down better than screwing in scrap pieces of wood to serve as my guide and then having to fill holes. My only complaint, like others, is the instructions. Definitely not the easiest to follow.
Johnathon Buckridge (verified owner) –
Have you ever had to rip a piece of material and tried to do it with just a steady hand? It’s really hard to get a straight accurate cut. The Bora five piece clamp set with straight edge gives you the ability to get a straight clean cut. You can do four or eight foot material and if the clamp set is difficult to figure out there is a web site available with instructions on the proper use of this handy tool
Elijah Wolff (verified owner) –
Great for cutting sheet goods. The only downside is that it’s not easy to connect & disconnect to the extension.
Charity Gorczany (verified owner) –
I am very impressed with the BORA NGX Clamp Edge Saw Guide did not bend or bow while I was making cuts. The aluminum is heavy enough to be strong but the tool is light enough to use easily, this has become my go to strait edge clamping saw guide. The guide slides and adjusts from one end and the clamp holds firmly and did not come loose while I was using it.
Mae Keeling (verified owner) –
Perfect for cutting ACM panel on my drafting table
Mitchel Denesik (verified owner) –
BORA NGX 5-Piece Clamp Edge Deluxe Set – Almost everyone who has used a tracksaw appreciates its accuracy and clean cutting results, but their price tags are high and maybe prohibitive for the occasional user and Do-It-Yourself-er. This Bora set is a good option to avoid paying $500 and more for a good tracksaw. It does require a decent circular saw and a good blade that isn’t included, but most woodworkers already have one. Once the saw is mounted on the sled and the track clamped to the material it is easy to get straight clean cross-cuts and rips. I tested it by cross-cutting a piece of ½” plywood. The results were a smooth straight cut with almost no splintering.The track comes in two sections that can be combined to cut 8’ long boards and full-length plywood. I did wipe some silicone on the track to make the sled slide smoother but other than that it works great.The one issue I have is with the assembly instructions. They are all illustrations of steps to install and set up your saw and assemble the track etc. The problem is there isn’t any text to explain what you are doing or how to do it. Just pictures. Going through the process was some trial and error. For instance, it shows mounting the saw to the sled, but doesn’t tell you that the sled needs to be on the track for blade clearance. I included a photo that illustrates adjustments for the saw that I assume is for blade clearance. I found it hard to see why the two lines on the left are wrong and the lines on the right are correct.
Hubert Kuhlman (verified owner) –
Good quality product for the price. Maybe not as nice as a good track saw, but for the few projects I do each year it works fine. Allows straight cutting of 4×8 sheets in both directions. It works best with saws that have a flat metal base on top. My Porter Cable saw has ridges on top of the base which creates some problems. I ended up purchasing a Dewalt saw as the base is flat on top. I’d recommend getting a separate 4′ section for cross cutting sheets of plywood (4′ direction) to avoid having to keep taking the guide apart. Also the saw sits fairly high off of the wood so the cutting depth is reduced quite a bit. A 6 1/2″ blade would be marginal.
Alexander Shanahan (verified owner) –
Thought I was getting Justin and guide clampdown style for for power saw ended up getting a bonus edge guide which my circular saw fits into which I thought was rather nice used it a couple times so far seems to work rather well there’s a chip strip that goes with the text chance to stop the wood from chipping back if you’re doing doors so you don’t chip the edges makes it look clean would recommend this for anybody replacing or buying a new Edgcote clampdown style
Lauryn Prosacco (verified owner) –
I have used this quite often. The only problem that I had was with the base when I attached my saw I was trying to cut the edge of my countertop which was 1 1/2″. My 7 1/2″ blade wouldn’t cut deep enough to get the whole edge.
Oren Altenwerth (verified owner) –
Overall I like this Bora system. It clamps tight and did not bow while sawing. Once I got my circular saw mounted on the saw plate things went fast. I am glad I bought this system and I have used it often.
Sasha Bauch (verified owner) –
I deserve a hard kick in the pants – for not getting one of these tools years ago. Like many DIYer, I have struggled with using a piece of extruded aluminum or angle iron and a pair of clamps to cut straight lines (hopefully) in large sheets of material. The setup was time consuming and the cut wasn’t always straight. This tool virtually eliminates both of those problems. Very easy to use – with excellent clamping force – and sturdy enough to always get straight cuts. They also have a saw adapter (purchased separately) that holds the saw in a tray which slides along on top of the saw guide – eliminates the possibility of the saw drifting off track. This tool is a must have for any volume of 4X8′ cutting.
Gerda Bauch (verified owner) –
My son wanted this for a project he had, I thought he didn’t need it. I was surprised how handy it was and easy to use. I wouldn’t think of cutting a board without it now.
Dean Skiles (verified owner) –
Boro NGX 5-Piece Clamp Edge Deluxe Set is an excellent way to cut sheet-goods and other tasks. The set consists of two guide rail pieces to handle 4 x 8 panels. One aluminum guide is used to cross-cut the four foot side with a 50-inches long track. For the rip cut, add the second 50-inch guide extension to the first guide for a 100-inch length, a little over 8-feet long. The two set of tracks are held together securely with metal bars and four screws. The track is then laid on top of the supported panel and two edge clamps on each side, under the guide, are easily tightened to give a rock solid grip onto the panel edges. Two included track clamps are also included if you want an angle cut, any angle can be cut up to 90-degrees is possible. You can cut full 4 x 8 panels or smaller sizes easily with this setup. The circular saw making the cut can run along the edge of the aluminum track guide or attached with the provided saw sled that slips into the aluminum guide securely in a groove. Once the saw is mounted to it runs along a groove in the guide preventing the saw from wandering, assuring a straight cut.. It works similar to a track saw. Included in the set used with the sled plate are two lengths of 3M non-chip strips that attach to the bottom for riding on the panel. It minimizes any top edge tear-out for a cleaner cut. This is useful for bonded veneers; although not needed for other panels like MDF or construction grade plywood. The sled is made of sturdy plastic with honeycomb reinforcement that is rigid, doesn’t flex. The saw is held-down with hold-down screws and clips, can be positioned and removed easily. Bora also offers, optionally, other tool sled plates to hold routers and a jig saws that work with the track guide, too.I own a portable table-saw and continue to prefer Bora’s system for breaking down sheet-goods resting on two saw horses. It is safer than handling large sheets alone on the table saw. It gives me more control making the cut safe and clean.
Ladarius Purdy (verified owner) –
This NGX Saw Plate can be great but it does not fit my Milwaukee M18 circular saw and the directions are complicated. The plate will hold the vast majority of circular saws though and glides across the BORA NGX Saw Edge systems. The problem with my M18 circular saw is that its bottom plate is not a rectangle, the back inside end does not have a corner for the clamp to attach nor can I ensure that my saw is perfectly square on the ruler marks of the NGX plate (see pictures). The directions are complicated. First, I put the no-chip strip in the wrong spot. The directions say to put it on the edge of the NGX Edge saw guide but didn’t specify underneath the Edge. I tried to remove the strip but the adhesive came off too and it was a mess. Second, its fairly easy in theory to mount a saw on the plate but the directions make it difficult. I found myself wondering what the heck an “excrusion” is. The illustrations could be much better. This plate is well-engineered and sturdy. Using this plate, it is much easier to get an accurate cut because the no chip strip tells you where the blade will cut as opposed to not using the saw plate and measuring the distance from your circular saw’s blade to the edge of the edge clamp. I still use my NGX Edge saw guide as its a great substitute for lugging big boards across a table saw. The saw must be mounted perfectly on this plate for smooth and clean cuts. Made in China.
Ara Kovacek (verified owner) –
This is a very convenient tool for cutting across large sheets, like plywood. Being 50″ wide means being able to handle 4′ sheets of plywood. Having a self locking feature is another nice feature. Simply line up on your marks, lock it into place and cut.
Carroll Weber (verified owner) –
The Bora NGX is a great product for ensuring straight cuts! I use it by itself most of the time but it also has accessories that can be used with saws, routers, and jig saws.
Giovanni Bednar (verified owner) –
I have wanted a track saw to breakdown plywood for a long time, but I could not justify the cost for a tool that I would use only a few times per year. The Bora NGX 5-Piece Clamp Edge Deluxe Set is well designed, extra sturdy and easy to use. The Bora NGX Set is less than one-third the cost and functions just as well as a track saw; therefore I think it is the perfect alternative for the DIYer who cannot afford a track saw. The BORA NGX clamping system is super strong and will not slip. I was especially pleased with the track clamps that came with the set, they allow the clamps to be used to make cuts at angles other than 90 degrees. Joining the two 50 inch straight edges together with the track clamps allow for angle cuts even on sheets of plywood. A phillips head screwdriver is required to connect the two straight edges together, but even though this may be a hassle, it serves to insure that the straight edge is indeed straight.I was impressed that the set even came with 2 Rolls of 55-inch self-adhesive non-chip strips used for reducing top edge tear-out. I was disappointed with the instructions that came with the set, I found them to be almost useless. I also had to look through several tool bags to find a #3 allen wrench which is required to move the brackets that hold the skill saw on the saw plate—it seems that a #3 allen wrench could be included in the set. I did find a wonderful video on YouTube from WorkshopAddict that does an excellent job of showing me all of the features of the BORA NGX set.I would definitely recommend the BORA NGX 5-Piece Clamp Edge Deluxe Set for anyone who already has a skill saw and is looking for a low cost alternative to a track saw.