No products in the cart.
If you’ve ever started breaking down plywood before realizing your clamp edge isn’t square to the material, you know what a pain it is to go back and fix each piece. The NGX T-Square makes it simple to square up your clamp edge without ever having to measure or move to the other side of your material. By replicating the way a table saw fence works, this accessory helps your NGX Clamp Edge stay square to your material adding a level of precision to your work.
- Squares your clamp edge to the material you are cutting
- Trapezoidal wedge system makes it easy to connect components
- Precision aluminum extrusion profile perfectly matches clamp edge fixed head
- Fits all sizes of NGX clamp edge
- Part of the NGX clamp edge system to cut and rip sheets and boards
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
| Weight | 1.5 lbs |
|---|---|
| Dimensions | 10.00 × 4.00 × 3.00 in |
| Color Family | Silver |
| Ideally Used With | Circular Saws |
| Material | Aluminum |
| Model | 544002 |
| Power Tool Accessory Type | Other Accessory |
| Product Length (in.) | 10 |
| Tools Product Type | Other |
86 reviews for BORA NGX T-Square Clamp Edge Accessory
Only logged in customers who have purchased this product may leave a review.
Related products
Saw Tracks
Model# 196664-7
$75.76
Saw Tracks
Model# 196953-0
Saw Tracks
Model# TTSWC
$44.99
Saw Tracks
Model# KMA2700
Saw Tracks
Model# SM844
Saw Tracks
Model# 71174
Saw Tracks
Genesis 2 in. Plunge Saw Aluminum Rip Cutting Track System for GCS545C and GPCS535CK (3-Piece)
Model# GAPCS203
Saw Tracks
Model# 198673-2
$30.54
Marianna Metz (verified owner) –
I have this and the extension for a 104″ reach to rip sheet goods. But buying the two thinking you are going to reconfigure each time you “rip” and “crosscut” a 4×8 sheet is not going to work–too long and too much wear on the parts. It holds well, but takes time to set up straight. A little pricey!
Justina Mraz (verified owner) –
I had a problem with the non-chip strip; it was pulling away from the metal and adhesive after I installed it. I contacted the manufacturer and they immediately sent a replacement.
Raoul Tromp (verified owner) –
This is a very convenient tool for cutting across large sheets, like plywood. Being 50″ wide means being able to handle 4′ sheets of plywood. Having a self locking feature is another nice feature. Simply line up on your marks, lock it into place and cut.
Niko Hill (verified owner) –
BORA NGX Clamp Edge Saw Guide is a quality guide for circular saws, routers and even jig saws. It is made of heavy duty aluminum with an excellent clamping method that secures the guide rail above on top of the sheet goods with an edge clamp. The handle to tighten the guide is easy to use by one person and doesn’t budge at all when used with the saw. A secure fit is critical in preventing the saw from wandering off the cut. It doesn’t happen often, but it can ruin the cut and I’ve done it. I had a shorter Rockwell guide and it wasn’t nearly as well done as this one. There is an optional second section that can be joined to this 50-inch rail extending it to handle rip cut for sheet length goods, too.An advantage of this system is the excellent options that can be had, sold separately, to make it even better to use. I used my rail with their universal circular saw plate that mounts the circular saw using hold down clamps. The plate can then be slipped into the slots on the top of the aluminum rail securing it. It then works more closer to a track saw. Included with the plate is a length of 3M non-chip strip to attach to the bottom of the plate along the saw blade, reduces any top edge tear-out for a cleaner cut. This is useful for bonded veneers. Bora has similar plates for routers and a jig saws that slip into the slots on the top of the rail. Finally, I was at initially concerned about the plate being plastic. It is thick plastic and feels substantial for DIY work, all well done. I tried the rail and saw plate out with my Milwaukee cordless circular saw and it fit nicely after about five minutes of making set-up adjustments. You have to slide over the hold down rail that has two clamps and make it exactly parallel to the saw blade and lined up on the plate’s blade guide. It is all easily done with allen screws and a flat slotted screwdriver. Really not a big deal, but the saw has to be accurately lined up to get a straight cut. I didn’t use their non-chip tape and didn’t need it for the MDF used. Overall, this is an excellent tool for crosscutting sheet goods. The rail alone is first rate and with the circular saw plate it goes quicker and is more accurate. I also own a small work-site table saw and when working alone prefer this method to cut sheet goods on two saw horses. It just is safer with my experience level and equipment setup. I feel the Bora system however you’ve configured it is a good value for DIY-ers to other methods.
Crawford Kutch (verified owner) –
Exactly what I needed for rip cuts without the need of a track saw
Annabelle Kuhic (verified owner) –
This clamp edge was very easy to use.
Marcellus Brakus (verified owner) –
Purchased this kit to augment a WTX have owned for many years. Clamp mechanism of NGX is much better design IMO and is easy to set. Using the saw sled with Mak 18V LXT sidewinder and this combo works well to add and easy to set up track saw rig for panel work in my pocket shop.
Layne Auer (verified owner) –
This is a great tool. I’ve been fiddling for years with just clamping a long piece of straight wood to plywood when I need to make cuts with any precision. So, three clamps and a bulky piece of wood. It works, but it’s a pain. This tool allows you to clamp on sheet goods up to 4 feet wide and get cutting right away. It seems to clamp on consistently at a right angle, but I’m a bit compulsive, so I do check each time. You will have to do some calculation to know how far to set the clamp from where you need to cut–you have to calculate some offset from your saw’s guide. Unless–you can get the Bora Saw Plate that fits with this. If you have the saw plate, you fit your circular saw to the plate, attach an additional guide to the clamp edge, and after setup, you can set the guide to where you want your cuts. This speeds up the process like crazy, and basically gives you the capabilities of a track saw from your circular saw. Great stuff.
Colleen Hammes (verified owner) –
Easy to use guide clamp that makes accurate cuts quickly. Saw base is easy to mount to your saw and easy to dial in. Great setup for ripping and cutting down plywood.
Isai Bailey (verified owner) –
NEVER A CROOKED CUT – THIS IS A WOODWORKERS MUST HAVE TOOL – THIS “BORA PORTAMATE” 50 INCH SAW GUIDE SYSTEM IS GREAT – THE CLAMP EDGE GUIDE HAS FIXED END CLAMP HEAD SO YOU JUST PLACE, ADJUST & CLAMP FROM ONE SIDE -YOU CAN RIP & CROSSCUT PLYWOOD WITH YOU CIRCULAR SAW – STRAIGHT EVERY TIME – BUILD WITH RIGID ALUMINUM FOR STRENGTH & ACCURACY – USED WITH THE “SAW PLATE” FOR PERFECT CUTS.
Bradly Kozey (verified owner) –
This is one of those tools I never knew I needed until I tried it. I’ve always used a couple of clamps and something with a “straight” edge to try to get a straight line. That involved finding something straight and of course running from side to side of the sheet to adjust the clamp. This tool takes all that extra effort away. Set it where you need it and quickly clamp it at one end, then cut. Done. It’s very light, very easy to maneuver, and the adjustable clamp slides easily in the track.Pair the clamp with Bora Saw Plate accessory (https://www.homedepot.com/p/BORA-NGX-55-in-Saw-Plate-with-Non-Chip-Strip-544001/311799074), and move your saw effortlessly along the track. These clamps and accessories basically turn your circular saw into a unisaw!
Giovani Moen (verified owner) –
I got this to help me cut large pieces of plywood for some upcoming woodworking projects. I expect this to work perfectly in assisting me in handling full sheets of plywood, OSB, MDF, and anything else that comes in large sheets – can’t wait to get started this weekend. The track and attachments are very well made and the instructions included will help greatly when setting this up and using it.
Raina Davis (verified owner) –
This appears to be well-made but I never had to use it after I bought it.
Alexandra Sanford (verified owner) –
Excellent guide and easy to use. When the two parts are assembled, they formed a straight edge that was verified with a level. Highly recommended.
Curt Terry (verified owner) –
Tried to use it over the weekend on a few sheets of plywood. It seems as if not completly square. There does not seem to be any adjustments to square it off perfectly.
Amalia Collins (verified owner) –
The Bora NGX is a great product for ensuring straight cuts! I use it by itself most of the time but it also has accessories that can be used with saws, routers, and jig saws.
Santino Wisoky (verified owner) –
So my Dad had a guide for his circular saw which was two pieces. It was a pain to setup & get straight. I ordered this guide because it was one piece & can be setup with one hand as I demonstrate in the video below. When cutting thick plywood, using one of these guides is way easier & more accurate than trying to rip the material on a table saw or using a circular saw freehand. Mine came with a sled, which can be used in conjunction with the guide to make the cutting easier & more accurate.
Gretchen Nitzsche (verified owner) –
I set this up today to test it out, First I removed my Craftsman circular saw from another brand track saw base. Then I installed it on the Bora base using the instructions that came with the set. First problem was the instructions are not the best but still able to figure things out. I set the tack across my table saw and placed the base on the track then the saw on the base. This let me adjust it to the track so the saw is not skewed on the base. After installing the saw on the base I installed the tear out strips. They were very easy to install and fit perfect to the track. Then I placed the base with saw on the track again and checked that the blade would ride along the edge of the tear out strip all the way down both pieces of track.. Its now ready to use. I took a piece of 3/4″ red oak plywood that was 76″ long and 24 1/2″ wide and cut 1/2″ off the whole langht so I had 76″ X 24″. I don’t have alot of room to work so I would rip my sheets of ply out side using my truck and a saw horse. but this time I just layed it across my table saw and clamped it down and cut it. The two piece of track connected together and the bora track layed down and clamped with the slide clamp only it was solid as a rock it was not moving. I placed the base and saw on the track and made a perfect cut and my work piece was nice and clean no tear out at all. Now with it 24″ wide I needed 2 pieces 28″ long so I took off the extension track and just use the 1 piece to cut across the width to cut off 28″. Now the left over piece I took and cut off another 28″ langth with my table saw then I compared the 2 pieces and they both were perfect and match up they both were square to each other. I find the base rides on the track very smooth and it does not skew any when you stop and start again. There is no slop in the base when riding along the track. I did not use the 2 track clamps at this time but thay are great I checked them out and thay adjust great they fit the track with no problems and I know I will use them alot in the future. Now with all that said the only thing I can see a problem with is the nuts on the bottom of the base. when I went to adjust the lock down track on the base the nuts turned in the grove. This should be a long nut made with flat stock so it can’t turn in the grove not a hex nut that will ware the plastic if its tighten and loosen to maney times. For me its ok I am leaving the saw set up. Even with the one flaw above this is easer and better than the other brand I have been using that I had to go buy clamps to hold it down to keep it from walking on cuts. Its also harder to set up for long cuts so The Bora clamp edge deluxe set is a Plus plus for me. Now all I need is a Bora Centipede so I dont have to use my truck as a table.
Mackenzie Padberg (verified owner) –
Super handy for trimming doors to fit after a whole home flooring project.
Edgardo Morissette (verified owner) –
This tool is like having a portable track saw. I most recently used it for ripping and cross cutting sheets of plywood and 4’x8’ PVC trim sheets. And using it with the caddy/sled/sawplate/whatever-you-want-to-call-it, which attaches to the saw, sure beats my previous method. No more fighting an imperfect 2×4 to stay flush. The caddy fits on two of my 7 1/4” saws (one corded, one cordless), as well as my little 6 1/2” cordless. At first I struggled to attach the saws, but that was because I wasn’t lifting the blade. Once attached, you lower the saw blade to make sure there’s reasonable cutting depth (keep in mind the caddy’s clamps should be placed as to not interfere with the saw’s motor/housing etc… I made that mistake too). That brings me to the paper instructions…. Would have been nice if they were clearer. Bora’s website wasn’t any help either… I had to goto youtube to figure it out. There are a lot of fine adjustments required to get the saw perfectly straight in the caddy, so I’ve left my corded saw in it so it’s ready to go for the next project.The guide comes in two pieces, which when combined provides 100”. Keep in mind when you only use the main piece you’ll get a little less than a 50” cut due to the clamps on each end. Would have been nice if this guide had quick change/setup capability to go from 55” to 100”. Assembly to 100″ requires removing a few screws and then screwing the ends together. Of course, then you have to reverse the process to take it apart for storage. I greatly appreciate the hanging hooks on both guides since I can get them out of the way when not in use.The 50” and 100” non-chip adhesive tape strip, is a nice idea in theory. In practice, it’s useless in my opinion unless you (a) adhere it perfectly straight (although it will be kinda straight if not perfect after the first cut); and (b) make only straight cuts. If you do a beveled cut you’ll cut the tape unless you flip the whole sled contraption around to the other side of the track…. and doing so changes the blade’s position. I haven’t tried the two additional track clamps for angle cutting yet because I haven’t needed angular cuts. To attach the track clamps you have to remove the ends and slide them onto the track. Overall this seems well built and it’s a very helpful tool for the DIYer like me who wants the advantages of a track saw. I’m pleased with it.