No products in the cart.
The BESSEY 4 in. drill press vise is made from high quality 30,000 PSI cast iron for many years of service. Integrated mounting slots in base for t-slot tables. Grooved jaw provides a firm grip on the work piece. Durable powder coated finish.
- Effective tool for holding parts on a drill press table
- Precision ground base and slide
- Convenient pivot handle
- 4 in. wide jaws
- Maximum opening: 4-1/8 in.
- 4 large elongated mounting holes
- Fits almost any machine table
| Weight | 7.26 lbs |
|---|---|
| Dimensions | 9.60 × 3.10 × 7.30 in |
| Clamping Strength (lb.) | 100 |
| Duty Rating | Standard |
| Hand Tool Type | Vise |
| Individual/Set | Individual |
| Jaw Capacity | 4.25 in |
| Jaw Width | 4.0 in |
| Material | Cast Iron |
| Model | BV-DP40 |
| Swivel base | No |
| Throat Depth | 1.0 in |
| Tools Product Type | Hand Tool |
| Vise Type | Bench |
72 reviews for BESSEY 4 in. Drill Press Vise
Only logged in customers who have purchased this product may leave a review.
Related products
Fastening Tools
Model# JT27
Fastening Tools
Model# 905-AS
Fastening Tools
Model# 906-AS
Fastening Tools
Model# 63302
Fastening Tools
Yost 8 in. High Visibility All Steel Utility Workshop Bench Vise
Model# 908-HV
Fastening Tools
Yost 6 in. High Visibility All Steel Utility Workshop Bench Vise
Model# 906-HV
Fastening Tools
Model# 38-604
Fastening Tools
Model# MR33C
Domingo Kunze (verified owner) –
FUNCTIONED as expected, did the job.
Zoey Aufderhar (verified owner) –
It works great for what I needed t for.
Kailyn Spinka (verified owner) –
Does the job I needed it for. Has some slop in the lead screw, but much better product than sold in the other big box stores.
Orland Moen (verified owner) –
Yes can’t beat the price works well not used a lot but gets the job done
Leonie Graham (verified owner) –
At present, just using for home maintenance, repair and small projects. Meets and exceeds my needs at this time.
Chet Will (verified owner) –
Works as expected, wish i had bought the vise with the release to adjust width. Its also a tad bit shallow if your trying to hold round tube.
Sincere Barrows (verified owner) –
I used it to hold my golf clubs during regripping and it worked great.
Carolyn Torp (verified owner) –
I shopped the internet for a reliable vice for my drill press. At the under $20 price point at HFT I thought I’d give this try. Glad I did. After I cleaned the shipping snot off and lubed it with some good stuff works just fine. Decent value for the money. Would buy again if need a second one.
Cordie Kilback (verified owner) –
Works as it should, but doesn’t come with mounting bolts
Bradford McGlynn (verified owner) –
I love it as a second hand.
Santos Franecki (verified owner) –
A real nice, small but sturdy, vise for a smaller drill pres. Easily attaches to press.
Susanna Greenholt (verified owner) –
Perfect fit for the Ryobi drill press.
Avis Schultz (verified owner) –
This was easy to assemble and met my requirements.
Rusty McGlynn (verified owner) –
Vice was easy to install on my workbench and have had no problems with it. Highly recommend.
Reyes Klocko (verified owner) –
It is not too strong but ok for light work.
Jacey Weber (verified owner) –
It’s handy with my portable workbench, working on sprinklers, pipes and drip irrigation. Just the right size and weight.
Eliane Rogahn (verified owner) –
This is a very well made item from Betsy as all of their clamps are. I only wish it had a quick release feature so you didn’t have to wind and unwind so many revolutions. Solid and well made, very happy with it.
Sophia Botsford (verified owner) –
Works great, easy to work with
Hank Paucek (verified owner) –
The vise seems to do ok for what I use it for. The jaws seem to be a little sloppy.
Genevieve Mosciski (verified owner) –
Delivered as shown, on time…works great.